Had transmission cleaned last mo and now it has started not shifting from 2 gear to dr
It sounds as if when the transmission was"cleaned", that some sludge or small bits of trash got left behind and is now stuck in the very small hole of the shift solenoid. Did the transmission filter get serviced,too? May want to replace it if it did not get done. The best way to find out what the problem is is to check for transmission codes and look at the shift adapts with a scan tool. Good luck.
Try to shift it while engine's not running/battery disconnected (there's a special screwdriver-hole beside the shaft to release). If that works then there's something wrong with sensors, otherwise (if it does NOT shift) there's some garbage like bolts, pieces of tools etc left over while assembling.
62 views
Usually answered in minutes!
×