How To Install Replace Broken Power Window Regulator Chevy Trailblazer GMC... The window regulator is bad !
SOURCE: Driver Side Window won't work- Chevy Blazer 2003
If it does not make any noise, or sound like its getting any power, most likely its the switch.
SOURCE: Driver's Side Power window control panel on door doesn't work.
I had the same problem a few weeks ago. I took it to a mechanic who has the same vehicle and he said it was the switch in my driver side door panel. Not that big a deal, but a little costly and the switch has to be programmed by a dealer wich is BS. The mechanic put the switch on and it will work on all my other windows except my driver window. so good luck.
SOURCE: drivers side window control cluster
The control may have gone bad... You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then you can disconnect the controls and test them
SOURCE: Passenger window won't work using the driver side control switch
Open the window with the local button and keep the button pressed for 3 seconds after it has fully opened. Then close the window and keep the button pressed for 3 seconds after it has fully closed. This calibrates the position of the window which it lost when you changed the battery. Good luck
There are 2 fuse boxes..
first one is under the hood on the driver side (black cover )
second one is under the driver's side second row seat (tilt the seat forward and you'll find it (black cover)
1,086 views
Usually answered in minutes!
×