Changed a lot and wasted money when the first step at no cost is to have the fault codes read
then it may be the immobiliser is inoperational
There are 3 position sensors.But first you have to scan it better with the scanner or Consult. Also remove CKP ref (between gearbox and engine and check if all cogs (tooth) are in good condition(not damaged)
When you put the ignition key on is there a check engine light on if you dont have a check engine light on no power to the ecm no spark np nothing could be a fuse start with that
Coil packs are bad i would guess . That would be my next step !! Good Luck.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jeff_24365d731679262d
54 views
Usually answered in minutes!
×