NOTE: In the reset position, the button can be pressed an additional 1.59 mm (0.0625 inch) against a spring. This is a normal condition.
To reset the inertia fuel shutoff switch , press button on top of inertia fuel shutoff switch .
saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
SOURCE: remove fuel pump from tank ford windstar 98
To gain access to the fuel pump, it is necessary to remove the fuel tank.
To install:
SOURCE: 1998 ford windstar will start, but won't turn
if car has solonoid mounted under hood, then ,jump from baterry cable on solinoid, to ignition wire or post. if van works then solinoid is bad,,
Testimonial: "thanks for taking the time to answer my question! we have already spent $$$ on repairs so your advice will definitely help us troubleshoot!"
SOURCE: 2000 ford windstar hard to start sometimes it will
Could be many things wrong at once.
Check your fuel pressure first, then check your spark plugs for spark, check your system for vacum leak.
SOURCE: 99 Ford Windstar. Not getting any power to the fuel pump
first check the fuse if it is good then check for power at the relay
1,153 views
Usually answered in minutes!
×