Owner manual,Download manual
installation super tuner 3. Download manual
95 ford 150 wiring diagram,
pioneer 3 wiring
SOURCE: cant find the blend door actuator on 2003 ford f150 super crew
The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.
SOURCE: i have 95 ford f150 my front wheels are leaning
Some lean can be normal, but if you are noticing it after owning the truck for awhile you are right to be concerned.
If you know how to check the balljoints, check them for excessive movement. Also look at your tierod ends. If it has been some time since you had an alignment now would be a good time to do it. The parts have to be tight to hold a good alignment.
Most places will do an estimate first before the repair. This will give you a chance to change out the parts you feel comfortable about and save a little money.
SOURCE: i have 95 ford f150 with the tail ligts stuck on
you need to change the brakelight switch its located on the back of the pedal and also your flasher relay may need replacement!
SOURCE: 2002 ford f150 4.2l wiring diagram
The COIL PACK TOWERS are numbered :
coil----3---4
pack---2---6
plug----1---5
-----------------------------------------------------------------
The engine cylinders / spark plugs are numbered :
passenger side , front to rear , 1 , 2 , 3
-----drivers side , front to rear , 4 , 5 , 6
-------------------------------------------------------------------
The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )
SOURCE: i need a ford f150 solenoid diagram so i can hook
Hi, if you have the solenoid on the fender, connect the big wire from the battery on one side and the big wire to the starter on the other side. It doesn't really matter which side, but if there are additional wires that fit on a big terminal, they go along with the battery wire. The smaller terminal marked "S" gets the wire from the ignition switch (via the safety interlock switch). If there is another small terminal on the solenoid, it either goes to the ignition coil or is not used. Please let me know if you have any questions and thanks for using FixYa.
774 views
Usually answered in minutes!
×