Trunk leak
Check for defective spot welds around the plastic inserts on the left and right
sides of the trunk. If the spot welds burnt through the metal, there will be holes were water can get in. Use some JB Marine Weld to seal up any holes or cracks in the sheet metal. Also, check the rubber drain holes under those
inserts, that are in the sheet metal of the car, to make sure they are
not blocked with road dirt. Also, check the weather stripping on the
outside of the car, adjacent to the trunk. If the rubber and chrome
trim weather stripping is pulling out (on the exterior of the rear
quarter panel), then water will leak through the little plastic
attaching screws and into the trunk beneath the plastic containers on the left and
right front sides of the trunk.
×