SOURCE: Torque specs for 96 Honda Accord 2.2L
the main bearings bolts is to 1st step 30Nm or 22lbs ft and the last step is 75Nm or 54lbs ft in this tighten secuence. 9 3 1 5 7 on the top bolts and........ ........ ........ ... 8 6 2 4 10 botton bolts and the connecting rod 45Nm or 34 lbs ft i hope be help you
SOURCE: head bolt torque specs for 200 honda accord 3.0
its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs
SOURCE: Crank shaft bolt torque specs for 2001 chrysler
the dampner is the crank bolt
Testimonial: "This expert is amazing, smart and extremly helpful."
SOURCE: torque specs for head bolts
Hello joee105,
The head bolt torque is a three step procedure:
1. 29 ft. lbs.
2. 51 ft. lbs.
3. 78 ft. lbs.
See image below for torque sequence.
I hope this helps.
Regards,
Jerry
SOURCE: HEAD TORQUE AND SPECS FOR A 2001 HONDA ACCORD 2.3L
Tighten the cylinder head bolts. Tighten the cylinder head bolts is sequence to 29 Nm (3.0 kgf-m, 22 ft. lbs.). Use a beam-type torque wrench. When using a preset type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it. Make sure the threads are clean, new heads bolts are best.
2,832 views
Usually answered in minutes!
×