How to change my lock cylinder to a 2005 dodge neon

SOURCE: location of dodge neon 2005 oxygen sensor

ask at the parts store where i bought the part

SOURCE: 2005 dodge neon light stays on

i have a 2003 dodge neon and mine does the same thing and i had the oil changed by the dealer, its full of oil as well, they put just a tad over in it and the light comes on and blinks for second then goes off and the only thing i do is let the oil go out on its own and get to the level its supose to be and once it gets to that it will stop, well it should but if you want to be sure have it checked out. i hope this helps you out, let me know if it does.

SOURCE: locating and replacing a camshaft sensor in a 2005 dodge neon

this is a very very simple procedure. you do not need pics. there is a sensor located at the end of the engine on the far side from the belts. at the top. it has a plug with two wires in it. just remove the two 10mm bolts un hook the plug and reverse the process to reinstall. if you have a factory intake you may have to remove it to access this sensor. just the intake tube.

SOURCE: i have a 2005 dodge neon, throwing codes p0129,

you will have to deal with the u code first. This is a communication problem between computers. My first guess is you have a bad computer or an open wire somewhere. Their is no way a backyard mechanic can do this without the proper tools to diagnose and with the knowledge to not cause further damage.

SOURCE: need to change alternator belt on 2005 dodge neon.

First you need to take off the other belt. Turn the tentioner (2), usually a 3/8 ratchet, and remove the belt.

Second, you need to loosen the alt tension bolt, almost straight down from the (1). Push alternator toword motor and remove belt. Installation is the opposite.

Hope that helps