Just make sure you flush the system before you put a new break booster on if she is an old unit...made that mistake before and bought 2 new boosters instead of one
If your truck has a brake booster, I suspect the vacuum hose to the booster has gotten fuel into it or just gotten old and is collapsing inside.
SOURCE: brake lights don't work on my 04 dodge durango
get yourself a cheap multimeter from a store like radio shack etc. with someone pressing the brake check at the socket to see if you have any power. remember it is DC volts not AC.. if you dont have any power check the grounds, there are a few, under the truck, and under the hood by the engine,if that doesn't work, you can try popping the rear covers off at the back and you might have loose wires, give a light tug on the wires and see if any pull away from the body.... look close at the bulb plug, you can also have a loose wire there or a broken ground tab... hopfully this can help you... if you have any more of a problem let me know...
SOURCE: 1999 Dodge Durango. Brake Light and the ABS Light
If you backup lights are not working as well, I would say check the fuse for the backup lights, if the fuse is good, see if you are getting power to that fuse. We had this problem and after weeks of searching and changing sensors, we found the backup light fuse was good, but not getting power. Ran a wire from that fuse to the cig. lighter fuse and all woprksf great.
SOURCE: Brake lights stick while driving but turn off when pressing brake
CHECK YOUR BRAKE LIGHT SWITCH THAT IS ON YOUR BRAKE PEDAL UNDER THE DASH
SOURCE: the ESP/BAS light keeps coming
Have you unhooked your battery for something? You might try making sure the stability control's steering sensor is correct...
Basically, start the car turn the wheel all the way left to the stop, all the way right, then back to center. This lets the stability control know where "center" is.
Try this:
1) Disconnect your battery, wait 1 minute & just turn on the lights for a second as to remove any residual current from the computer.The lights will not come on but still turn ON.
2) Re-connect the battery, this should have cleared all of the lights except for the ESP\BAS light.
3) Start the car, center the wheels, turn all the way to the left then all the way to the right. This should clear the ESP\BAS light.
-------
If still the same problem then the esp/bas module needs to be checked and reprogrammed by the dealer to turn it off.
Thanks. Keep updated for any more query. You can rate this
solution and show your appreciation
340 views
Usually answered in minutes!
I tried everything you guys suggested now i have a good brake but esp bas brake and abs lights are on and the car wont shift out of drive wtf need help
×