- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to determine if it's the horn or the alarm. My Montero (not Sport) had 3 horns. All 3 of which go off w/ the Alarm, but only one is connected to the horn on the steering wheel. I could not make mine go off w/o pulling the relay under the hood.
My spring was bad in the steering wheel. I was able to bypass the wire using instructions that I actually found on a Mitsubishi Forum. Link below:
The code indicates the Input Turbine shaft speed sensor is giving an erratic signal or there may be a mechanical transmission issue. I would go with a new sensor. Try rockauto.com to purchase a new sensor, much cheaper than the dealer. Also see sketch of location of the sensor on the tranny.
Find the lower hose. Follow it to the engine. Remove the metal housing from the engine that the lower hose is attached to. The thermostat will be behind it.
the demobilized feature is activated, lock and unlock your keyless entry remote to deactivate the demobilized feature, then try cranking your truck again.
×