I've just replaced solinoid for induction as it was faulty but didn't fix problem fuel filter has been replaced
Check EGR Valve For Proper Function if it Does NOT Accurate Replace EGR, Also With Off Check For Carbon Blockage, Under Throttle Body Also can Get Clogged Causing this
SOURCE: UNEVEN TICKOVER AND SLOW PICKUP, VERY BOOMY THROUGH INDUCTION
valve bent or valve seats worn
SOURCE: Mazda 3 Information Display
This really works...the fuse that controls the Information display power is the one labelled "ROOM" (15Amp). It is located under the hood in the engine fuses.
I didnt even replace mine, I simply scraped off the dirt/rust from the metal portion and reinserted it. If this doesnt work, test the ROOM port with a functional fuse switch (I used the one labelled HORN, 15amp). If it works with the switch, you have a good part, but need a new fuse.
Free solution to an expensive problem...if you dont know whats wrong.
SOURCE: Location under hood for fuel pump relay on 2002 Mazda Millenia S
JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..
SOURCE: is the fuel filter for the 2000 mazda millenia
Hello jfamily004: My name is Roger and I will answer for you. Open the trunk. pull the floor cover back at front of the trunk. Under the rear window area. You will see an access panel. Remove the screws and the cover. You will find the fuel filter under the cover. Before you remove the hoses remember that the fuel is under pressure. This should not require any special tools. Reverse your take off procedure to install the new filter.
Should you need further help please just ask. Please rate the quality of your answer. This way I know the answer was helpful. Thank You for using Fix Ya. Roger
Testimonial: "thanks, one other question, i can see the filter underneath the car, is the reason your saying me to go thru trunk is because easier access?"
129 views
Usually answered in minutes!
×