What size wrench do I need to change the thermostat on a 2002 diamante

SOURCE: What wrench is needed to remove the 2002 GTI lug nuts?

they are the locking wheel nuts(lugs)and you will need a key(not a hex allen key)to remove them.if you look close you will see that the sides are not equal.
I use a nut spilitter or an old socket hammered onto the nut to remove it,means replacements but next time you buy a car check to make sure you have the radio code and the wheel nut key.

SOURCE: What size allen wrench is needed to remove the

I just did my front brakes yesterday and it needed a star drive ( torx wrech ) bit, not an Allen wrench

SOURCE: what size wrench do i

Normally it depends on engine size but most chrysler small 4 cylinder and v-6 should take a 13 mm
unless it has been changed...some customers like a thicker bolt head and they will change it if they work on it themself......But from factory it should be 13 millimeter head....................
........Hope this helps.................................Metalpoet....Level 2 chrysler tech.

SOURCE: what size wrench do i need to change the oil on a 2002 dodge stratus

15 or 17 millameter,or 5'8 american