Question about 2007 Chevrolet Chevrolet Silverado 1500

1 Answer

Rear Brake Noise

Trouble with rear breaks had a thumping noise when i stopped put the brakes on ? I put all new parts on shoes drums hold down kit drove for about 10 20 miles the noise is coming back any ideas it was quiet at first thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,218 Answers

Make sure the shoes are not over adjusted and too tight.

Posted on Jul 23, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Toyota Celica thumping noise from the rear, drum brake issues?


Hi. The noise id definitely coming from your parking brake. You will need to break down both sides and inspect everything. There is more than one reason to cause this failure. Check the shoes, are they in good condition ( check that the pad material isn't separating from the backing plate)? Are the springs attached and in good condition? Ask a person for help. Have a friend engage the parking brake and release. You will check the shoes and see if they have fully returned. If they don't you must determine if the failure is related to a cable or seized lever against the shoe. Take your time or you may spend more money than you need to. Please let me know if there is anything else. Good Luck.

Sep 06, 2018 | Toyota Cars & Trucks

1 Answer

1998 rear brakes make a noise when backing


Noise after replacing rear brake shoes and drums...help! - Toyota ...

www.toyotanation.com/.../328271-noise-after-replacing-rear-brake-shoe...
Jan 19, 2010 - 15 posts - ‎9 authors Check to make sure the new drums dont have a longer/thicker drum face that is scraping the back plate. ... 1998 Mazda 626 FS-DE/CD4-E .... I experienced rear shoebrake clicking/clacking with an older Saturn. ... plate and to be banged back against the plate causing the clicking or clacking noise. screeching noise from rotors + brakepads after ...
15 posts
Nov 20, 2009
'95 Right Rear Brakes makin' a "clicking" noise when ...
15 posts
Jan 6, 2008
Rear Brake Noise
15 posts
Oct 30, 2005
More results from www.toyotanation.com

Nov 08, 2015 | 1998 Toyota Camry

1 Answer

Rear Brakes


Are the drums new? Have they been machined?

Jul 23, 2015 | Cars & Trucks

1 Answer

My brakes don't calibrate on their own, therefore they make a squeaking sound when I break how do I fix it


Check rear brakes for:
1. Brake shoe (Cracked or distorted)
2. Installation bolt (Loose)
3. Rear brake drum (Scored)
4. Brake shoe (Dirty).
5. Brake shoe (Glazed)
6. Tension or return spring (Faulty)
7. Anti-squeal shim (Damaged)
8. Shoe hold down spring (Damaged).
6. Apply a thin layer of multipurpose grease on the area between the back plate and the brake shoes by slightly pulling off the shoes with the help of a screw driver.

Jun 27, 2012 | 2007 Toyota Yaris

2 Answers

ABS light comes on sometimes. Hear rubbing noise coming from the rear of my 2007 F-150 when accelerating from a dead stop.


Abs is your break system, have rear breaks checked. Might be time for new brake shoes on rear of truck. Les swab tires will inspect for free, and lots of other automotive and tire outfits. You want to jump on this soon, so not to end up going past brake shoes and then will ending up having to buy other parts, drums etc...please let me know if my trouble shooting was right. Thanks mike

Jun 08, 2011 | Ford F-150 Cars & Trucks

1 Answer

Rear drum brake makes a thumping noise when i apply my break


Could be grease or brake fluid on brake shoes.

Jul 20, 2010 | Cars & Trucks

2 Answers

Back brake drums grinding


Take tires off then inspect rear brake shoes if okay and not down to the metal service the drums with sand paper and put them back on you might have to replace the drums and shoes!

Dec 24, 2009 | 1993 Ford Escort 4 Door

1 Answer

Replaced brake shoes and had drums turned when installed the right rear brake stated to make a clicking sound when brakes are applied. The sound is consistant with the speed you are going when you apply...


you need to inspect your backing plates for grooves in the pads where the brake shoes contact the backing plate. during a break job these spots are supposed to be lubed with proper non grease brake backing plate lube. some people use never sieze compound... also make sure brake shoes were installed correctly having the primary and secondary shoe correctly in it's place, if you have grooves in your backing plates then the shoes will bounce up and down as they move across the groves this will make a clicking noise, also have seen cracked brake drums make noise... give close inspection with wheels off , if you can jack rear of car off ground support with jack stands , chalk front wheels , then remove wheels on both sides but use a lug nut to hold brake drum on securley, now have someone watch and listen and watch as you let wheels spin under power of engine at low rpm , inspect and watch for possible clues...please rate my help, thanks...

Aug 08, 2009 | 1999 Chevrolet Prizm

2 Answers

New shoes on rear


if you didn't turn the drums or disk down the area wear the saftey tab on the brake pads are still touching it causing the noise

Jul 02, 2009 | 2005 GMC Sierra 1500 Hybrid

1 Answer

I need a schematic for the rear brakes on an F150 super cab with 4.6L automatic trans 4wheel drive


Drum, Rear Brake System Standard Rear Brake
9969082.gif
Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 — Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 — Washer (2 Req'd) 4 — Anchor Pin (Part of 2211) 5 — Wheel Cylinder 6 2028 Brake Shoe Anchor Pin Guide Plate 7 2A637 Parking Brake Lever 8 2296 Brake Shoe Retracting Spring (Short) 9 2296 Brake Shoe Retracting Spring (Long) 10 2200 Rear Brake Shoe and Lining (Secondary) 11 — Washer 12 2106 Parking Brake Lever Pin Retainer 13 — Brake Shoe Adjusting Lever Cable Guide 14 2A642 Primary Brake Shoe Parking Brake Lever Link 15 2A601 Parking Brake Link Spring 16 2068 Brake Shoe Hold-Down Spring 17 2A176 Brake Shoe Adjusting Lever 18 2048 Brake Shoe Adjusting Screw Socket 19 2047 Brake Shoe Adjusting Screw Nut 20 2041 Brake Adjusting Screw 21 2049 Brake Shoe Adjusting Screw Spring 22 2200 Rear Brake Shoe and Lining (Primary) 23 2A178 Brake Shoe Adjusting Lever Cable 24 2211 Brake Backing Plate
Heavy Duty Rear Brake
6dcb5d2.gif
Item Part Number Description 1 — Rear Wheel Cylinder Retaining Bolt 2 00538 Lock Nut 3 2212 Rear Brake Backing Plate 4 2262 Rear Wheel Cylinder 5 2A642 Primary Brake Shoe Parking Brake Lever Link 6 2A601 Parking Brake Link Spring 7 2A637 Parking Brake Lever 8 2106 Parking Brake Lever Pin Retainer 9 — Parking Brake Lever Bolt 10 — Secondary Shoe Assembly 11 2A179 Brake Shoe Adjusting Lever Cable Guide 12 2068 Brake Shoe Hold-Down Spring 13 — Adjusting Lever Pin 14 — Adjusting Lever Return Spring 15 2A176 Brake Shoe Adjusting Lever 16 2047 Brake Shoe Adjusting Screw Nut 17 2049 Brake Shoe Adjusting Screw Spring 18 2041 Brake Adjuster Screw 19 — Primary Shoe Assembly 20 2068 Brake Shoe Hold-Down Spring 21 2200 Rear Brake Shoe and Lining 22 2035 Brake Shoe Retracting Spring 23 2A178 Brake Shoe Adjusting Lever Cable 24 2092 Brake Adjusting Hole Cover 25 2069 Brake Shoe Hold-Down Spring Pin
The rear drum brakes:
  • Have internal shoes that expand against the brake drum (1126).
  • Are a single-anchor type.
  • Are actuated by one rear wheel cylinder (2262).
  • Have two pistons in the rear wheel cylinder (2261). One exerts force against the upper end of the primary shoe; the other exerts force against the upper end of the secondary shoe.
  • Adjust rear brake shoes and linings (2200) automatically.
  • Need manual brake adjustment if the adjusters are not operating properly or after the rear brake shoes and linings have been replaced.
When the brake pedal is applied, hydraulic fluid pressure forces the pistons in the rear wheel cylinder outward, moving the rear brake shoes and linings against the brake drum.
The rear drum brake system includes the parking brake mechanism. Refer to Section 206-05 .

Apr 04, 2009 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
2007 Chevrolet Chevrolet Silverado 1500 Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...