Tryed fuses under dash algd wher else can I check or do
SOURCE: 1989 Subaru Gl Wagon At
does the vehicle have an alarm system??? possiblly causing fault, or if the battery is fine, check the main fuse in fuse box located in the engine bay beside the battery,
SOURCE: 2001 subaru outback headlight not working
chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>
SOURCE: wiring diagram driver door 2003 subaru forster
you can download this manual and see wiring diagram
http://alarmsellout.com/support/diagrams/vehicle/SUBARU%20FORESTER%201998-2006.pdf
SOURCE: Subaru Forester, 2003. clock
The clock works, correct? It is just not illuminating when your headlights are turned on? If this is the case then it is most likely that you have 2 burned out bulbs. The forester clock bulb is Sylvania bulb part #2723
Hope that helps! I have a bunch of clock related info on my website www.autoclockrepair.com. Let me know if I can be of assistance.
SOURCE: I only received one set of keys and would like to
call a dealer and ask the parts guy if the keys are coded. if they are coded you are going to have to buy your keys from dealer, if not then take your keys to a place where keys are made and have them make you a set.
152 views
Usually answered in minutes!
×