At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a blend door acuator which moves when u change your settings. Its a electric motor. Down under dash, Will need a mech and a heating and cooling diagram to find where the motor is,
its a problem with the switching mechanism. you have to look up under the dash to see if you can see where the switching mechanism is. if you can not see it from there youll have to remove complete center dash
I had a similiar problem, the vent going to the screen had disconnected and instead of blow air on the screen it was instead blowing it around under my dash board. check the vent going to the screen
It's normal for the A/C compressor to come on with the defroster to dehumidify the air so the windsheild won't fog up under humid conditions. You can still control the air temp. out the vents with the temp. select switch.
AC blows where you have your control switch set,if it only comes out your defroster have the vacuum check at the blend air doors or if you have a faulty heater control unit.
Just had the same problem. It was a broken vacuum line on top of the engine. Check all vacuum hoses, and especially the one that goes to your pot. You should hear it hissing when the engine is running. If not, wiggle them around until you find one. Let me know how it goes.
common problem, check under dash by the gas pedal if control arms are muving went selecting from ac to heat cuz this it is the control for the vents to go from ac to heat and to defrost.
×