2002 Land Rover Freelander Logo

Related Topics:

Key fob only locks/unlocks back door

Took freelander for brake check, garage used keys to lock freelander, now Key fob will only lock/unlock back door also sets alarm, tried pressing 1= drivers door 2 = passengers door doesn't work can you help please

4 Related Answers

Anonymous

  • 2004 Answers
  • Posted on Apr 14, 2009

SOURCE: key fob for hyundai elantra not working

Please dont worry yourself so much the security locks needs to be reprogrammed to enable it work effectively. Same happens to other vehicles as well.

Consult Hyundai garage close to you or if you have it in your manual.

Good luck.

rate this.

Ad

Anonymous

  • 1 Answer
  • Posted on Aug 21, 2009

SOURCE: Central locking issue on my Land Rover Discovery II 2003

Does it open from the outside once you have manually opened it from the inside.

Anonymous

  • 3489 Answers
  • Posted on Nov 08, 2009

SOURCE: the key fob quit locking and unlocking. I have to

the first thing to check is the battery(im sure you already knew that),. next step would be to take down to your nearest rover dealership and ask if there are any upgrades and they may have to reprogram your alarm system which can only be done with there diagnostic equipment.

m22loud

  • 136 Answers
  • Posted on May 09, 2010

SOURCE: central locking

turn key twice when opening, ie turn right. once drivers door will unlock, turn twice passengers doors will unlock, and locking is turn anti clock wise once will lock all doors, turn twice will set door dead locks.dead locks will stop openand lock internal button working and handle from opening door. the same actions can be applied to the remote one press drivers door, two press passenger doors, press and hold unlock button for 5 seconds and rear window will open.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

How to program fob for 2011 chevy malibu

google how to program fob for 2011 chevy malibu for more info

On the Chevy key fob, press and hold the "Unlock" and "Lock" buttons at the same time until you hear the door lock and unlock again. This means you're all set. Re-insert the programmed key back into the ignition to the "On" position to finish the Chevy key fob programming process
0helpful
1answer

Door locks to side doors will not lock or unlock using either the key fob or door buttons. Back hatch will unlock using key fob

Check the fuse for the door locks first, then if nothing there look for a wiring diagram that shows the ground wire location and verify the ground is made. Also the driver side lock switch button could be the culprit
0helpful
1answer

2007 sonata driver door won't unlock with key fob

door reciever or lock has issues
did you scan the car first.
does the receiver put 12dc to the unlock solenoid.
if yes the solenoid is bad.
if not the receiver has issues. (check connections first there)
0helpful
1answer

When I press my central locking on my key fob for my Land Rover Freelander 2003 TD4 Diesel , only the rear door can be opened, when I press to lock ALL doors they lock and when I try to unlock them with...

Procedure for 2002 Land Rover models:
1. With the doors shut and from inside the vehicle.
2. Turn ignition to position 1 and back to off within 5 seconds
3. Remove key from ignition and press and hold the unlock button (has
an arrow on it) for 15 seconds during this time press the key lock button
(has Land Rover logo)3 times within 5 seconds
4. Release both buttons
5. Doors will lock and unlock to show correct programming has occurred hope this helps
0helpful
1answer

I have a 1996 gmc suburban that i cannot unlock the driver's door. it was locked with key fob. i cannot unlock the door or open the door. the key will not unlock the door. help anyone?

if the key does not turn the lock spray it out with wd 40 run key in and out of lock few times.because everyone uses remotes to open their cars the waffers in the door locks get coroded and wont fall in proper place when key is inserted.give it good cleaning and see if it will unlock
1helpful
1answer

When we use our key fob to lock the doors, i know we must use the key fob to unlock the doors to avoid the alarm from going off. Recently I parked in a parking garage at an airport (left key fob at home)...

You should be able to just unlock the door with the key, and even if the alarm is still going of try to start it the key should override the alarm.
1helpful
1answer

Central locking

turn key twice when opening, ie turn right. once drivers door will unlock, turn twice passengers doors will unlock, and locking is turn anti clock wise once will lock all doors, turn twice will set door dead locks.dead locks will stop openand lock internal button working and handle from opening door. the same actions can be applied to the remote one press drivers door, two press passenger doors, press and hold unlock button for 5 seconds and rear window will open.
6helpful
4answers

My Porsche Key fob no longer unlocks the doors

Insert key into door barrel or ignition lock and turn key, whilst doing this press the unlock/lock button, the led on the dash should flash to indicate this has initialised the key to the car, then remove key and test operation of remote. If this fails then a new remote plus coding to the car by your dealership is needed
1helpful
1answer

I have a 2004 Honda Accord EX. Key Fob works trunk but not doors

Programming
When
Key added or replaced. System malfunction.
How
Obtain all keys. A maximum of 3 keys can be programmed. Close all doors and boot/tailgate. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press key lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press key lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press key lock or unlock button. Within 10 seconds: Press lock or unlock button of first key. System should now lock or unlock vehicle. Press lock or unlock button of second key. System should now lock or unlock vehicle. Press lock or unlock button of third key. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed keys.
NOTE: If less than 3 keys are to be programmed, remove ignition key after programming last key.
0helpful
1answer

How do we unlock the power door locks. no key fob? no owners manual.

Pressing the button on the driver's door will unlock the locks. Key fobs are available from reputable locksmith. They can program them for your vehicle.
Not finding what you are looking for?

127 views

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...