I got a computer use and it will not start the how do you reset

use a scan tool to reset the ECM

Sounds like your security has set and you will need to hook a computer that is body computer capability to reset the computer and that should help your vehicle start again

Dom you have a manual?
Even if you do not reset, the car should start (The Jeep Grand Cherokee start anyway), but maybe the Mazda won"t.
At the oil filter cover, did you find some wire, switch or something electrical?

The only way to reset a computer is to take it to a dealer they have the codes needed to do this

First if you did not reset the computer after you replaced the throttle position sensor then do so and if that fixed the problem.If it did not help then replace the coolant temperture sensor and the coolant level sensor then reset the computer.If you replace any sensor you have to reset the computer or the computer will not reconize it as being new and won't reset the perimeters for that sensor.

There is not a computer reset button installed on the car anywhere you need to have a computer that connects to the ecu on the car (the cars computer) with the computer attached you can reset codes or reset the computer.

to reset the computer just take off a terminal on your car battery for 15 minutes, this will reset the system, if you have a standard stereo you need to remember or know the code incase it locks you out and asks you for one after.

how do I reset my computer on my 2007 jeep compass

the computer is reset by just removing the battery and let it sit for about 10 minutes then just plug it back in but i think your terminals might be dirty scrub them and plug the battery cabels back and started