http://schematicsdiagram.blogspot.com/2011/12/heating-knob-light-bulb-under-dash.html
----------
Parking lights, tail lights and dash lights
not working?
http://technoanswers.blogspot.com/2012/01/parking-lightstail-lights-and-dash.html
---------
How to replace Instrument panel and dashboard?
http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-instrument-panel-and.html
-------
Tail lights and dash light fuse keeps blowing?
http://technoanswers.blogspot.in/2012/02/tail-lights-and-dash-light-fuse-keeps.html
---------
This will help.
Thanks.
It is not the computer.
If you take the dash apart and remove the digital insturment panel.., use a soldering iron and re-tin.., or heat the solder connections on the back of the circuit board.., just enough to briefly melt the solder.., to re-establish good electrical connections. You specifically want to pay attention to the IC Chip on the circuit board.., which is a 14 pin IC chip that is Black in color.., and measures about 5/16" x 3/4" usually labelled IC2 on the printed circuit board. You can start with this component and re-try connecting to the harness in the dash to see if it works.., if it works.., great.., if not.., just go ahead and re-tin all of the solder connections on the back of the circuit board. The 14-Pin IC Chip is usually the main source of the problems with this digital dash panel.
117 views
Usually answered in minutes!
×