Question about Opel Cars & Trucks

1 Answer

How much to torque the big-ends. main-bearings and head bolts

How much to torque the bolts on the opel 1.6 1989 model

Posted by on

  • magi Mar 08, 2017

    torque setting for opel kadett 1300 1989

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Opel Master
  • 53,755 Answers

Go google and type in -- torque specifications for opel engine 1.6 L 1989-- and there will pages with the specs

Posted on Oct 22, 2015

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Roger Foster

  • 701 Answers

SOURCE: torque specs for toyota tercel

Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Posted on Apr 15, 2009

michael_grey

Michael Grey

  • 365 Answers

SOURCE: engine bearing torque settings big end and main bearing

4 cylinder correct?
1bac25a.jpg

Posted on Jun 20, 2009

Stanley Kramer

  • 115 Answers

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

Posted on Sep 04, 2009

Anonymous

  • 92 Answers

SOURCE: torque specs for 1998 tercel 1.5L

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Posted on Sep 20, 2009

Anonymous

  • 382 Answers

SOURCE: hyundai elantra 1.6GLS J2 torque settings

dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can u help with the torque setting for opel astra 16v 2004 g engen main and bid end and top


mains renew bolts. stage 1 tighten 50nm stage2 tighten 45degrees stge3 tighten a further 15degrees. big ends renew bolts stage 1 tighten25nm stage2 tighten a further 30degrees use a torque wrench and then a angle gauge

Aug 24, 2017 | Opel Cars & Trucks

1 Answer

What's the torque settings for the Opel corsa1.4i crank mains and big ends


Please note: You must use new bolts as these are torque to yield bolts, in other words they are a type of linear spring.
Connecting rods/big-end bearing cap bolts (use new bolts)
stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 30 degrees
Main bearing cap bolts (use new bolts)
stage 1 ... 50 Nm (37 lb ft)
stage 2 ... angle tighten + 45 degrees
stage 3 ... angle tighten + 15 degrees

Nov 22, 2016 | Opel Corsa Cars & Trucks

1 Answer

Hi , can you tell me what is the torque settings for Main,biggens and head bolts for Opel combo 1.4 16v 2006 model z14xep motor?



STANDARD TYPE GM ROD BOLTS
STAGE 1---18 LB/FT (GRAPHITE GREASE UNDER HEAD, OIL THREADS)
STAGE 2---30 DEG's additional bolt head rotation.


CRANK BOLT
GRAPHITE GREASE UNDER HEAD & WASHER, OIL THREAD
STAGE 1---70 LB/FT
STAGE 2---30 DEG's additional bolt head rotation.
STAGE 3---15 DEG's additional bolt head rotation.
CYLINDER HEAD BOLTS for standard gaskets
GRAPHITE GREASE UNDER HEADS & WASHERS, OIL THREADS
SEE SEPARATE SHEET FOR TIGHTNING SEQUENCE
STAGE 1---18 LB/FT 25NM
STAGE 2---90 DEG's additional bolt head rotation.
STAGE 3---90 DEG's additional bolt head rotation.
STAGE 4---90 DEG's additional bolt head rotation.
STAGE 5---45 DEG's additional bolt head rotation.

Nov 06, 2016 | Opel Cars & Trucks

1 Answer

What is the torque for head bolts settings for opel corsa 2009 1.7DTI


You would not do such major work without a shop manual, would you? Torque spec's should be in it.

Mar 19, 2016 | Opel Corsa Cars & Trucks

1 Answer

Torque specs for opel corsa 1.4 comfort utility 2005 model


Assume you are needing the cylinder head torque specs?

The head bolts are angular torqued and best practice is to fit new bolts and ensure all the female threads are thoroughly cleaned. I recommend greasing the bolt threads and washer faces.

The initial torque (following a spiral pattern) is 25 NM followed by angular movements of (degrees) 90 + 90 + 90 + 45
I generally start the engine and thoroughly warm up and allow it to cool before the final 45.

Nov 09, 2015 | Opel Corsa Cars & Trucks

1 Answer

Torque settings opel astra 95 1.6 big end and main bearings


Opel astra 160ie 93 model, what's the big end torgue specs on bolts

Apr 05, 2014 | 1994 Opel Astra

1 Answer

Head torque settings


Here you go.
Cylinder head bolts cold engine 65-72 ft. lbs. warm engine 73-80 ft. lbs

Mar 28, 2014 | 2005 Opel Corsa

2 Answers

I have a 1998 Holden Astra eng noEL20B24119 and want to know the Head bolt torque settings and sequence. The engine is the transition model with twin tappet cover seals. has the torx star headed bolts.


I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:

10 6 2 3 7

9 5 1 4 8

the torque specs for the C20XE,C20NE,X20XEV were all
25nm(18lb/ft),-then 90 deg,-90deg,-90deg.
Z20LET were as above plus an additional 15deg.
Same data for smaller and larger engines(except a couple that were 45deg instead of 15)
Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused.
Put grease(graphite if you have it) under bolt heads and washers,oil the threads.
Usually the head sets come with the torque specs.
I hope this helps you.

Apr 02, 2011 | Honda Accord Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Brad Brown

Level 3 Expert

18127 Answers

george parkes

Level 3 Expert

980 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...