Where is the crankshaft sensor located on my 1998 Buick skylark 6 cylinder

SOURCE: Horn will not work on Buick Skylark 1998

the horn relay is located under hood in the fuse box

SOURCE: Crankshaft Position Sensor

the dual crankshaft position sensor is secured in an aluminum mounting bracket and bolted to the left side of the timing chain cover, partially behind the crankshaft balancer, hope this helps get back to me if you need mre help. please rate my fix as i strive to be the best

SOURCE: location of crankshaft sensor

Hello mitchoreb: My name is Roger and I will be glad to help with your answer. You will need to raise the vevicle in order to see the sensor. Make sure to use safety stands when ubder the vehicle when raised up.Look in the area behind the oil filter.Just in front of the knock sensor.This will be just above the oil pan rail.The knock sensor is a round sensor with a round plug.The crank sensor should hove a oblong plug. You should have a picture along with this reply. Should you need any further help please just ask. Please rate the answer you received as this way we know you recived helpful information. Thank You for using FixYa.Roger

SOURCE: Replace crankshaft position sensor

Remove the left front wheel....(drivers side). Remove all accessory belts. Remove the crankshaft shaft pulley.......remove the plastic lower timing belt cover.....and there it is! It is mounted with one bolt.
The wiring runs down the right side of the timing cover while looking at it from the drivers side of the car.

Testimonial: "I ended up having my mechanic do the work. He did say he had to move all those parts to get to the sensor. "

Mike Butler

• 6674 Answers
• Posted on Sep 08, 2009

SOURCE: where's the crankshaft position sensor located in 98 plymouth voy

Guessing it's a 6 cyl, 3.0L, but should be located on transaxle housing above vehicle speed sensor.