At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Passenger side headlight went out, I replaced with new bulb, headlight is still out. Any suggestions as to what to try next?
Drivers side headlight works fine.
Find a wiring diagram (www.bbbind.com) free wiring diagrams . Then go to youtube an check out Eric the car guy's basic electrical trouble shooting . An there are one's for understanding wiring diagrams . Learn voltage drop testing also.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure the the headlight switch is in the off position.
Open the bonnet to the Escort.
Locate the back side of the headlight assembly to the headlight that needs to be changed (driver's side or passenger side) from inside the front the engine compartment.
Unplug the wires from the back of the bulb.
Turn the back of the bulb housing counterclockwise one-third of a turn until the bulb and wire harness are released from the headlight assembly.
Unplug the wire harness from the bulb socket.
If using Halogen headlight replacement and be careful not to touch the glass bulb part. Handle it by the socket at the bottom of the headlight.
Plug the wire harness into the new headlight replacement.
Align the tabs on the headlight housing to the slots in the headlight assembly and insert the bulb into the assembly. Twist the headlight one-third of a turn clockwise until it locks into place.
Whether they become damaged in an accident or simply burn out over time, your Subaru Outback's headlights may eventually need to be replaced. Fortunately, once you've purchased the right replacement bulb for your model year, performing the repair yourself is relatively easy. These instructions only apply to Outback models made after 2000.
Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment (driver's side bulb removal only.)
2
Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)
3
Turn the bulb cover counterclockwise and remove it from the assembly.
4
Disconnect the headlight electrical connector and undo the assembly retaining spring.
5
Pull the old bulb directly out of the socket and replace it with the new one. Press the retaining spring back into place and reattach the electrical connector.
6
Replace the bulb cover, and then turn on the engine. Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.
Replacing the High-Beam Bulbs
1
Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment ( drivers side bulb removal only.)
2
Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)
3
Disconnect the headlight electrical connector and undo the assembly retaining spring.
4
Turn the headlight bulb counterclockwise and pull it out of the socket.
5
Reinstall the new bulb, replace the retaining spring and reconnect the electrical connector.
6
Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.
I have a 2005 Lexus Rx330 with HID AFS headlight. My passenger side light went out. I thought the bulb burnt out, so I bought a new bulb. After replacing the new bulb, it happened exactly like my old bulb. It light up lightly and then total black out. What's wrong with it? I thought the ballast burnt. I called Lexus dealer and asked for the new ballast/transformer. Surprised me, they don't know what is it. They told me they only know the wiring harness and the socket, but not the ballast ??????? Could you tell me what do I need to replace?
as for the headlight, did you check the fuse. on some vehicles there is a fuse for the left and right headlight! the fuse should be in the underhood fuse and relay box.
The procedure doesn't call for removing the headlight assembly. It is as follows:
The high beam headlight bulb and the low beam headlight bulb are replaced the same way.
Open the hood.To change the high beam headlight bulb on the passenger’s side, remove the power steering fluid reservoir from its holder by pulling it straight up.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb by turning it one quarter turn counterclockwise.
Insert the new bulb into the hole and turn it one-quarter turn clockwise to lock it in place.
Push the electrical connector back onto the bulb. Make sure it is on all the way.
Turn on the headlights to test the new bulb.
If you replaced the high beam headlight bulb on the passenger’s side, reinstall the power steering fluid reservoir.
Hope this helps, but if you are having some specific problem leave a more detailed comment and I will try to help you.
No, you just might have to take out the battery. I was able to do it without taking the battery out, but only because I was being stubborn. There is one thing I definitely have to say is that you should change both headlights at the same time. My driver side headlight was the first one to go and I didn't listen and just changed that one, days later my passenger side one went out!
×