Question about 1990 Dodge Spirit

1 Answer

Turn signals don't work inside or outside i have checked all bulbs and fuses and relays but my hazard lights still work

All my bulbs are still good and i have checked all my fuses and relays my hazard lights still work both inside and outside what else can i check

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 53,770 Answers

Replace the flasher can/ module of the traffic indicators

Posted on Dec 11, 2015

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal problem.Fixed all bulbs and made sure flasher relay was working.all running lights brake lights reverse lights work and hazards work.but I get nothing on dash or lights when trying.


Double and triple check the fuse for your rurn signals both visually and with ammeter to check for fuse continuity, or just replace with new one of same amperage. The fuse can look good but have a hairline crack that is not visible.

Oct 19, 2015 | Cars & Trucks

1 Answer

2001 4 Runner blinker problem


The hazards use a separate relay. listen for signal relay clicking to locate the correct relay. Consult your owners manual for fuse and relay layout.

May 26, 2017 | Toyota 4Runner Cars & Trucks

2 Answers

Ok i don't know about much about cars but i know


sounds like the signal switch relay fuse. turn your signal on and check your fuse boxes... inside the car and under the hood. it will look like a little square box inside your fuse box next to your other fuses. with your signal on, you should be able to locate the relay because it will be making a clicking noise. pull it straight out and go get another one. hope this helps.

Nov 03, 2012 | Cars & Trucks

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

2 Answers

I have a 2000 Ford Escort. My left turn signal inside is blinking real fast. Outside it isn't working. Also, the brake light and Haz.Flasher isn't working on the outside either on the left side....


In the fuse panel with the fuses inside the car there are two big round units plugged into the fuse panel, one is your turn signal flasher one is your hazard flasher. I would start with those and move to other things if that doesn't fix it. Hope this Helps.

May 26, 2011 | Ford Escort Cars & Trucks

1 Answer

Where is the turn signal relay, hazard relay, and flasher for a 2003 Ford F150? My turn signals do not work (inside or outside), but 3 out of 4 outside lights work when the hazards are on, but with only 1...


It is not the flasher if the hazards work, it is 1 flasher for both turn signals and the hazard lamps. It is in a relay block ( along with the blower motor relay ) under the dash, about in line with the steering wheel column ).

Try tilting the steering wheel all the way up, and test again.

The other quick test is to cycle the hazard switch a few times, to see if it cleans the contacts for the turn signal on the MFS,

Apr 01, 2010 | 2003 Ford F150 Regular Cab

1 Answer

Turn signals won't come on inside or outside of car but hazard lights come on inside and outside of car


Check turn signal fuse, if fuse is good, check turn signal flasher, this is identical to hazard flasher, I believe on the 1997 it is located under the dash near the center console. The turn signal and hazard flashers are the same part number so try switching places with them and see if the turn signals work. If turn signals work after switching them you need a flasher.

Nov 09, 2009 | 1997 Chevrolet Camaro

Not finding what you are looking for?
1990 Dodge Spirit Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...