Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Dec 12, 2015

00 Linc ls v8 code P 0171, P0174 WHAT TO FIX - Cars & Trucks

1 Answer

Alex Daddi Gardiner

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

  • Cars & Trucks Expert 355 Answers
  • Posted on Dec 13, 2015
Alex Daddi Gardiner
Cars & Trucks Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Joined: Feb 20, 2014
Answers
355
Questions
1
Helped
107350
Points
774

Ok you are have a too lean fuel mixture on bank 1 & 2 there is a number of things can cause that what i would do is clean my mass air flow meter with the spray that was made for the maf then i would change the pcv valve and make sure its hose is clean then change your fuel filter this one is very important because if it is dirty the fuel pump will become weak so check your fuel pressure with a gage and find out the specification ok, so try those things and see what happens

5 Related Answers

Anonymous

  • 1450 Answers
  • Posted on Oct 02, 2008

SOURCE: 2000 Lincoln LS and the Engine Light came on. Codes 0171 0174

you probably have a vacuum leak. check all your hoses pcv hose for sure. it means the engine is seeing too much air with the fuel.

Ad

Anonymous

  • 165 Answers
  • Posted on Oct 20, 2009

SOURCE: NO FUEL PUMP PRESURE NEED TO FIND FUEL P UMP

the relay is in the battery juntion box near the battery, it is K4, (far right in the middle) check the fuses too. Also check the inertia fuel shut off switch. it may ned to be reset. It is located behind the LH A piller trim plate. (drivers side foot panel) it has a red button to push for reset.

(:DK

Bill Boyd

  • 53816 Answers
  • Posted on Oct 22, 2015

SOURCE: Location of 02 oxygen sensor on 00 Linc ls v8 need replacing

O2 sensors are after the cat converter and if you have 2 cat converters they will be after each converter
have you had the fault codes read to get that code or are you guessing that that is the problem
mostly with O2 sensors a wash and scrub in vinegar will get them working again but the HO2S sensors ( heated sensors ) in front of the cat converters give the most problems from the current in the wires or other circuitry faults
run the fault codes and save money

Jeff Armer

  • 15575 Answers
  • Posted on Nov 01, 2015

SOURCE: 00 Linc ls v8 how to replace alternation?

Go to you tube an watch a video !

czaa

Arnie Burke

  • 7339 Answers
  • Posted on Dec 06, 2015

SOURCE: 00 Linc ls v8 I give up after .ck valve covers still no pcv valve located

Look for a hose to the intake or call anypartstr...they have details of all cars

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Where is the location of the crank sensor on Linc LS v8,,00

Bottom Left Side Or Right Side Some Are Near Or In Your Transmission Or Gear Box
1helpful
1answer

Is there a way to replace a coolant control valve on a Linc LS v8 00 preferred for a DIY . would like to have a idea . Thanks so much for your help.

If your talking about the heat inside the car, yes. It is vacuum operated. On the passenger side. The hoses are about 1 inch in diameter. The valve is spliced in one of them. Make sure the vacuum is present before replacing.
1helpful
1answer

Is their a pressure amount on the Ac high side line 00 Linc ls v8

It varies with temperature, the important one is the low side, that should be about 28-32 PSI
0helpful
1answer

Where is the expansion valve on a 00 Linc LS v8

It is located at the inlet to the Evaporator core, most likely behind the glove box insert area.
1helpful
1answer

00 Linc ls v8 I give up after .ck valve covers still no pcv valve located

Look for a hose to the intake or call anypartstr...they have details of all cars
0helpful
1answer

00 Linc ls v8 how to replace alternation?

Go to you tube an watch a video !
1helpful
1answer

Location of 02 oxygen sensor on 00 Linc ls v8 need replacing

O2 sensors are after the cat converter and if you have 2 cat converters they will be after each converter
have you had the fault codes read to get that code or are you guessing that that is the problem
mostly with O2 sensors a wash and scrub in vinegar will get them working again but the HO2S sensors ( heated sensors ) in front of the cat converters give the most problems from the current in the wires or other circuitry faults
run the fault codes and save money
Not finding what you are looking for?

102 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...