After running the engine for about 10 minutes it turns off,i want to know what is the problem. my car is mazda B2200 1993.

Normal ..

run the engine at fast idle run the ac in maximum cooling and after a few minutes check the sight glass if bubbles present in the sight glass there is insufficient amount of refrigerant you'll need to recharge freon and about 10 ml of refrigerant oil PAG is best.

I would want to know if the computer is grounding the fan relay to make it come on, or if the relay is faulty. On some models the computer turns the fan on to keep the radiator from overheating when the engine is stopped, but that should only happen with the engine at operating temp.

If your check engine turn on, some fault code is stored in the PCM; I suggest scanned the PCM to know exactly what fault code is stored there and diagnotic tips.

Some Autozone or AutoShop tieh OBD Scanner Readers make this job for free (sometimes).

Im assuming you are refering to the anti theft security key relearn process.

1. Perform a security system relearn.
2. Let the vehicle sit for more than 10 minutes with the key off.
3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.
4. After 10 minutes, the security indicator will change state.
5. Turn the key off and wait 10 seconds.
6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
7. After the second 10 minute timer has expired, turn the key off for 10 seconds.
8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.
9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.
10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If that doesnt work, look into this link http://vatspasslockpasskeysecurityhelp.yolasite.com/

1. Perform a security system relearn.

2. Let the vehicle sit for more than 10 minutes with the key off.

3. Attempt to start the engine, leave the key in the run position monitoring the security system indicator.

4. After 10 minutes, the security indicator will change state.

5. Turn the key off and wait 10 seconds.

6. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

7. After the second 10 minute timer has expired, turn the key off for 10 seconds.

8. Attempt to start the engine. If the engine stalls, wait another 10 minutes with the key on.

9. After the 3rd 10 minute timer has expired, shut the key off for 10 seconds.

10. The security system will relearn on the 4th starting attempt and the engine should start and run.

If this doesnt work, and you are having STARTING issues, go to this link.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

try the cool pack

ur electronics that run this trans is slipping-u need to get a scan or 2 of the vehicle to view bad computer codes-advance A doesum free

what is the voltage of the battery when running, voltage when turned off, voltage after headlights are on for 10 minutes. is the battery good? how do you know. these take a sealed gell cell battery.

if i remember right if the battery light and check engine light is on, your alternators may be bad. your battery may just have enough to keep it running for a minute or so. you can take it out and get it tested at a auto parts store. or try charging your battery for awhile and see if it stays on longer. if this is completely wrong let me know