Buy dual beam light bulbs. When a single bulb is installed or the dual bulb got the high beams burned. It wont work.. Also check if the switch of the low-high beam is working properly. To make it easy. Buy a dual bulb and try it. Good luck
SOURCE: 2001 Toyota Corolla high beam lights are not
Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.
SOURCE: 1998 Jeep Cherokee replaced headlight switch, now they don't work
you need to replace the multifunction switch also
SOURCE: headlighbeamt cannot work on high beam
It could be in the switch for the low and high beam's
SOURCE: no low beams toyota tercel
This could be caused from bad dimer switch/ lost ground for high beams / or is it possible both of your high beams are bad? have you used a test light at the light to verify no power and good ground?
Testimonial: "good advice "
147 views
Usually answered in minutes!
×