Drl module location - 2006 Dodge Ram 3500 Truck

The Daytime Running Light (DRL) module location on your 1988 Dodge Ram B250 camper van may differ based on the model and year. However, the DRL module is often positioned in the engine compartment or near the front of the car in many vehicles, including some Dodge models. Here's a broad map to help you find it:

Engine Compartment: Begin by opening your camper van's hood and viewing the engine compartment. Look for a little black box, either rectangular or square, with wires connected to it. The DRL module is frequently positioned on or near the firewall, which is the wall that separates the engine compartment from the passenger compartment.
Near the Front Bumper: The DRL module may be positioned closer to the front bumper, behind the grille, or near the headlights in some automobiles. It is frequently attached to a bracket or metal frame.

Consult the Owner's Manual: If you have the owner's manual for your vehicle, it may contain precise information regarding where the DRL module is located. For more information, consult the index or the electrical system section.

Online Forums and Repair Manuals: If you still can't find the DRL module, look into online forums or repair manuals for your exact car model. Enthusiasts and mechanics frequently offer extensive information and schematics that can aid in locating the module.

Professional technician: If you are unable to locate the DRL module on your own or are uncomfortable working with vehicle electronics, it is best to seek the assistance of a professional technician. They can promptly locate the module and assist with any repairs or modifications that are required.

I hope is helpful!

please don't use abbreviations like 'Drl'. Only you know what it means. 'Daytime Running Lights' is worth typing in full. It is part of the Body Control Module according to this
http://www.hemanual.org/drl_control_module_repair_procedures-2827.html

Lots of information here

https://www.google.com/search?q=2013+hyundai+elantra+drl+module+location

Drl Module? ' Hyundai Forums

https://www.hyundai-forums.com > threads > drl-module

Jan. 16, 2009 - what is the DRL module? Accent! The next generation hot rod ... daytime running lights...you shouldn't have to anyways.. gimme a call at my ...
Fuse for Daytime running light
Aug. 20, 2015
Problem with Daytime Running Light Module
Mar. 23, 2020
Disable DRL?
May 6, 2015
How To Turn Off Day Time Running Lights?
May 27, 2011
More results from www.hyundai-forums.com

Hyundai Elantra: DRL Control Module. Repair procedures ...

http://www.hemanual.org > drl_control_module_repair...

Hyundai Elantra HD 2006-2010 Service Manual. Body Electrical System. Daytime Running Lights. DRL Control Module. Repair procedures. ..

There is no separate DRL module in this vehicle. DRL is performed by software detecting the need for DRL (daylight and engine running) and achieves DRL by pulsing the power to the high beam lights. The power pulsing is done by the front control module in the integrated power module once it gets the command from the body control module. You'll need a scan tool to see if the BCM has commanded the DRL on. If it is and you're not getting any DRL,

There is no DRL module .
Daytime Running Lamps (DRL)
The DRL are a function of the front turn signal lamps. The DRL will operate when the ignition switch is in the RUN position, the gear selector is not in the PARK position, and the headlamp switch is in the OFF position. When the BCM receives these signals it will signal the turn/hazard flasher module to turn on the DRL by grounding the DRL low control signal. The turn/hazard flasher module supplies voltage to the DRL on the right and left DRL/turn supply voltage circuits. If a front turn signal lamp is inoperative the DRL will not operate.
The DRL can be deactivated by turning the headlamp switch to the DRL OFF position while the DRL are operating. The DRL defeat position of the headlamp switch is a momentary ground signal to the BCM to command the DRL function ON or OFF. After each key cycle the BCM will default to the DRL ON function.

DRL location ? Module ? Lights ?
The operation of the daytime running lamps is controlled by the daytime running lamps control module. The module is powered by CKT 39 (PNK) from the GAUGES fuse, and it is grounded through CKT 150 (BLK). The module turns on the daytime running lamps under the following conditions:
Daytime Running Lamp (DRL) Control Module
Under the left side of the IP, taped on the IP harness

Daytime Running Lamps (DRL) NOTE: The smart junction box (SJB) must be configured when installing a new module. For additional information, refer to Section 418-01 .
The DRL system operates the low beam headlamps at a reduced intensity. The SJB supplies pulse width modulated (PWM) voltage to illuminate the low beam headlamps at a reduced intensity when the following conditions are met:

• The headlamp switch is not in the HEADLAMPS ON position.
• The ignition switch is in the RUN position.
• The transmission is not in PARK (P).

This dealer only repair ,unless you have the ford IDS (factory scan tool ) .

There is no DRL relay , has a lamp control module .
The daytime running lamps (DRL) activate under the following conditions:
?€¢
The ignition switch is in the RUN position.

?€¢
The ambient light sensor indicates daylight.

?€¢
The vehicle is not in the PARK position.

When the above conditions are met, the lamp control module (LCM) supplies battery positive voltage (B+) to the low beam headlamps through CKT 589 (GRY), the DRL resistor, and CKT 12 (TAN). The DRL resistor reduces the voltage supplied by the LCM. The low beam headlamps light at a reduced intensity. The DRL disable if the vehicle is placed in the PARK position. When the ambient light sensor indicates darkness, the low beam headlamps automatically switch from a reduced intensity to a regular intensity.
Lamp Control Module (LCM)
In the center of the IP, below the center heater outlets

The DRL (daytime running lights) module on a 2000 Savannah van is typically located under the hood, near the front of the vehicle. It may be mounted to the inner fender, the firewall, or another nearby location. In some cases, it may be necessary to remove a panel or access cover in order to locate the DRL module.
To find the DRL module, you may want to consult the owner's manual for your vehicle, as it should have detailed information on the location of various components. You can also try searching online for more specific information about the location of the DRL module on your particular model of Savannah van. If you are unable to locate the DRL module, or if you are unsure of how to access it, you may want to consider seeking the assistance of a mechanic or automotive technician.

Pont Grand Prix; has 16 pin DRL module, fuse removes DRLs and Auto-ON (there is also a fuse for air bags, SRS)
believe most recent GM models (99+), use a VCR tape sized DRL module that will be under the dash, behind radio, glove box, over pedals, etc are typical locations for your car in various years.. There are two 8 pin connectors to it

The drl module is part of the body control module,(bcm) located under the dash on the heater box. The drl relay is in one of 2 places. In the
fuse/relay block on the left fender. Or taped to the body harness near
the hose for the rear washer. The rear washer hose comes out of the
bottom of the front washer bucket to the firewall. Hope this helps.