2007 ford explorer eddie bauer driving vehicle came to abrupt stop traction control light was flashing 4x4 indicator came on felt like it locked up

SOURCE: overdrive transmission

this is the old style transmission code you have a problem with a solenoid inside the transmission go to a transmission shop to read and replace the solenoid only not a rebuild usually

SOURCE: Help... My four wheel drive

Try at full stop in neutral switching to 4 wheel auto ,give it a few seconds and if you don,t here it engage try putting it into reverse and then back into neutral and then into drive. If still dosen,t work tranny switch is likely sticking . service or repair.

SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and

I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.

Bill

• 424 Answers
• Posted on Oct 08, 2009

SOURCE: i have 98 eddie bauer ford explorer with headlight problems

The headlamp switch will cause the lamps to turn off. The switch heats up and turns the headlamps off. It will cool down and work for about 10 minutes and cut out,

SOURCE: clunking noise coming from under vehicle when

Check your axle joints for play worn joints will make noise