Is there any place I can ship my Philips Sonicare Diamondclean toothbrush for repairs?

The cat converter is breaking up inside, blocking some gas flow, causing it to heat itself. May eventually block it enough to cause rough running or completely shutting the truck down. No repairs are possible. It must be replaced. Most people just remove it & put a straight pipe in its place. But that's illegal. And you didn't hear that from me. Well, who looks under a 26 year old truck?

you need to know the code number in order to go any further.if you know the code or the second place pulled the code out and it referenced the 02 sensor then you have a place to start diagnosing,check your warranty as it may be covered under the emissions warranty(which is 5 years) as the car is only 4 years old.if they don`t really know what the code is or stands for then go to the dealer or get references from people you know to get it repaired.

there are thousands and thousands of junkyards, aka parts recyclers, and these days not only are they on the web but they also have searchable parts inventories. so google your state and city and "used auto parts". that is a GM part used on more than one year and more than one model. keep looking until you find the right color, as it will cost more to paint it than the car is worth. It can be shipped but the shipping on a part like that cost more than the part itself so stay within a 100 mile circle of your home unless you really like to drive. they will not remove your old one and install the new one, but they will accept your scrap so take some tools along or use a buddy's pick up truck.

Do the dash warning lights work when you turn the key to the run or crank position. If not you may have a bad ignition switch which is pretty common for those years.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

what year of truck what makes you think it was running on 4 cyclinder is it a v6 what size engine what year and make of vehicle

you need to use the more expensive obdII model reader... on mine it will tell you which bank left or right and which sensor front or rear, there are four oxygen sensors in most cars now, and mine is only the second top of the line Autozone model $120. I've used it four times already within the last couple of years so its paid for itself. #2 sounds like in the old days when you had to really pull up on the gear shift lever to get it to start this involved a neutral safety switch issue.

it might be in your ignition still try turning it from the first click acc to stat and dont stop on the on position thats how mine is

If the TV is more than 3- 4 years old the plasma is gone tray to call Philips or go for a new one it wiil cost over $ 300.00 to re fill and you dont get more than one year waranty.

if the engine will not start you can tryleaving the key in the on position for 15 min. then turn the key of and try and start the engine if not you will need to take car to chevy dealer ship and have the computer reprogramed. hope this helps.

If the glove box is anything like mine it is a modular piece assembled with screws.... let them break the handle.. get a replacement first from a junk dealer and have the broken part swapped out. Its like a seat belt catch in my 97 deville. The glove box in mine flopped open and the catch had broken and fell down the door of the glovebox itself. The whole door is assembled with philips screws and should be easily removed and a new latch put in.. whoever does it should not cost more than 50.00 in labor MAYBE unless you have a friend that would do it for a beer. I saw a complete glove box on ebay for 40.00 shipping ontop of that .. i saw the latch for 20.00 +shipping.