Here's a link to code P0455, P0455 OBD II Trouble Code Here's the link to code P0441. P0441 OBD II Trouble Code
SOURCE: 2000 elantra po455 code evap emission control
Large leak?... Fuel Cap not tight or the wrong one is installed. Also, the charcoal canister close valve may be stuck 'open' AND/OR the purge control solenoid valve may be stuck 'closed.'
SOURCE: engine light on Codes show
Hello! Those three codes commonly indicate the followi possibilities:
The gas cap was not sufficiently tightenend ater fueling, a bad gas-cap rubber o-ring, the vehicle had the key in the 'on', or engine running, or the tank was filed all of the way up the neck.
Any one of the abope causes will set all three codes.
SOURCE: P0441 EVAP Control System Incorrect Purge Flow
Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Evaporative Emission (EVAP) Canister Purge Regulator Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Purge Solenoid Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Sealing faulty.
Pipes between Tank Breathing and Throttle Body leaky/blocked.
Hose connection(s).
Intake leak.
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve.
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.
VSV connector near air filter box disconnected.
428 views
Usually answered in minutes!
×