How to reset the change oil light on a 2003 chevy silverado

covered in the link

https://www.google.com/search?q=2003+Chevy+Silverado.+It+Backfires+and+oil+pressure+drops

..

After changing the oil and filter, reset the monitor by proceeding as follows:

Turn ignition On, but do not start engine.

Fully depress and release accelerator pedal three times within five seconds.

If CHANGE ENGINE OIL lamp flashes for five seconds, this indicates system has reset.

Start engine. OIL LIFE should change to 100%.

If CHANGE OIL SOON lamp lights again, repeat reset procedure.

2001-08 Silverado, w/Driver Information Center

Turn ignition On, but do not start engine.

Press MODE button until DIC (Driver Information Center) reads OIL LIFE LEFT/HOLD SET TO RESET.

Press and hold SET button until 100 percent is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.

Turn ignition Of


how to reset oil life on 2004 chevy silverado

The sensor should be near the distributor on the back of the intake.

press the gas pedal on the floor and turn the key on then real fast mash the gas peal 3 times fast on the trird time hold it on the floor tell the oil light resets it self count to ten. should work just fine.

turn key on and pat gas three times within 5 seconds and light should blink. cut key off and crank vehicle light should be out if not try it again.

TO RESET CHANGE OIL LIGHT.TURN IGNITION SWITCH TO RUN POSITION WITH ENGINE OFF.PRESS ACCELERATOR PEDAL QUICKLY 3 TIMES IN 5 SECONDS.THE OIL LIGHT WILL FLASH WHEN IT HAS RESET.

Hello, my name is Ben and I can help you with this. Turn the ignition key to the "ON" position. Slowly depress the gas pedal 3 times within 5 seconds, the "CHANGE ENGINE OIL" light will flash. Turn ignition key to "OFF" , then start the engine. This should reset the light, Ben.

the oil sending unit could be out or the pressure guage is malfunctioning is the service engine light on?

you got to hold the oil change menu button down for atleast 5 secs to clear the computer and go to 0 percent oil life used

did you turn key to on position and depress throttle 3 times