When trying to enable phone bluetooth will not go to option

Hi
Normally when you try and connect or pair your device it normally ask for code. mostly its 0000 or 1234

thanks

Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.

1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.
   
   Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.
   
   After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
The Uconnect system is a great way to safely use your cell phone in the car.

When you try to pair your phone to the car via Bluetooth are you allowing the car to see it by enabling the phone visibility setting.
To do this go into the phones setting find the blue tooth setting then select visibility this allows the car to see it for about 1 minute 59 seconds then go to the cars settings on the dash cluster to pair the phone it should now find it.

About 4,890,000 results (0.54 seconds) Search Results

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing-problems/
Dec 29, 2015 - Determine which pairing process your device employs. ... Let's say you want to pair your phone with your car's infotainment system so you ..... If your tabletdoesn't come with built-in Bluetooth (and it looks like most, if not all, ...

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing...-/CP2/
Dec 29, 2015 - Let's say you want to pair your phone with your car's infotainment system so you can .... i factory reset my tablet and now it wont find my bluetoothspeaker to pair! .... It doesn't look like you can revert to the previous firmware ...

Bluetooth FAQ for Windows Phone ' Windows Phone How ...

www.windowsphone.com/en-us/how-to/.../bluetooth-faq

Windows PhoneRead the Bluetooth FAQ for Windows Phone and get answers to common ... You can pair your phone with a variety of devices that use Bluetooth, such as the hands-free system in your car, headsets, speakers, ... Where can I find it? .... ?My phone doesn't reconnect to the Bluetooth hands-free system when I get in my car.

iPhone 6 not connecting to car Bluetooth ' Apple Support Commu

select Bluetooth option on your car and make sure Bluetooth is enabled on your iPhone. On the car you should see your iPhone listed under Bluetooth devices. select pair and you should be good to go. you may have to enter a security code, but that varies by car model. hope this helps

To use your Bluetooth® wireless technology enabled phone in your vehicle, an initial one-time-only pairing procedure is required. To pair your phone, initiate Bluetooth® search mode in the vehicle. Then depending on the handset, initiate search mode or discoverable mode.* Once the vehicle finds the handset, a Bluetooth passkey is required to complete the pairing procedure.

You may choose any combination of 4 to 16 digits. Enter the passkey on the phone or vehicle, as prompted, and then the other device will ask you to verify it.

If it really is a 2006 or earlier year 335i Coup?, you need the vehicle's Owner's Manual. Since: "Vehicles require a fixed Bluetooth passkey for verification which is included in the vehicle's Owner's Manual."

You can obtain the manual from the dealer, when you provide them with your vehicles VIN-code, for a price of course.

From the BMW USA site:
Bluetooth FAQs

i bought 2003 BMW 745LI
i don't know how to connet phone and also i am not sure it has bluetooth

Your nav/bluetooth system will for the car will issue a 4 digit code in the screen of the car, this is a code which you input into the phones keypad.

.On an LS this is generally found by going into the info screen , then phone , then settings then add phone at this point the code for the car should appear often 1111 , 1212 , etc.
Your phone will have a Bluetooth enabling feature, under its tools or settings menu. You will be need to authorize the phone to search or enable new devices.Search" Hands FREE" should appear as an optional device and a pairing mode icon will be visible. The phone will search, indicate an item found and then prompt you for the 4 digit pass code on the cars menu screen. This code when input into the phone will clear the transfer of a connection between the car and phone.

your '99 might be "equipped with bluetooth" which means the car is wired for it, but may not have the module(s) for it. same is true for the 6 disc changer in the trunk on the LH side. its wired for it, but not necessarily has it installed.

call your BMW dealership (parts dept) with your VIN (actually the last 7 numbers is all they should need) and they can tell you if the car is "wired for bluetooth" or actually has bluetooth installed.

try this guy, he has all the manuals in pdf file and if he doesn't, just ask for it
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180490869526&viewitem=&sspagename=STRK%3AMESELX%3AIT