Have spare keys not cut, I've lost the original can the spares be cut
SOURCE: programming remote to open doors
Dear Customer,
If you didn't change your remote kit than its a best way to take to your dealer ,there is minor problem with sequence so they wil do free of cost with car document.
THNX
SOURCE: i locked my keys to my 95 ford thunderbird in my trunk
No there is not, but there is an easier way. You take a door stop (yep the ol triangle ones) and a hammer and put the door stop along the top and near the corner of the door. Hammer carefully the door stop into the door jamb and use a coat hanger to get your keys/hit the lock/pull the handle. Not that ive had to do this a few times, but it seems easiest for me and saves the locksmith charge.
Sincerely,
JC
SOURCE: FORD F150 2004 SPARE KEY WONT START MY TRUCK
no, you will half to get it towed to dealer and have a computer chip key cut from your spare key then thay will program it to the vehicle
SOURCE: My Spare Key Won't Start My Car
ok well here's the thing. This key has not been used before. The keys are cut to the specs of the ignition so they may be undercut so to speak. I know on my car i can turn it upside down it will work. But on the other hand it could just possibly be a back up for when you lock your keys in your car (not likely but it's still possible). You can keep putting your key in and out a bunch of times and **** the steering wheel back and forth as you turn the key to get it used to the ignition switch. See if that works and if not i will see what i can come up with in the meantime for this exact car.
117 views
Usually answered in minutes!
×