Everything works it just wont turn over - 2005 Dodge Ram 1500

If it has known good spark and fuel pressure try spraying carb cleaner in the throttle body while cranking engine to see if it will crank.

did you check the fuse

Fuse blown?

If you need further help, reach me via phone at https://www.6ya.com/expert/tom_1788908372a4836f

probably a fuse or wiring trouble

sounds like you need a new ignition, reason nothing works cause once it doese turn over n starts the car the tumbler is stick in the starting position jus not far enough to keep the starter engaged but far enough the it still trying to go trough the start process which cuts the power to everything else till the ignition returns to the on postion

did you try jus turning the ignition far enough to when the starter engages jus let go of it so the car doesnt start and see if everything else still doesnt work if it dont i belive its the igniton

also with out starting it or engaging the starter as in just turning the key on to get power does anything work?

idler pulley siezed when hot. on the way off, the belt took out some wiring

Have the battery tested for a dead cell. It may test at 12 volts but that doesn't mean there isn't a dead cell. Also, if the motor has good compression you probably shouldn't be able to turn it over by hand at the fly wheel. Maybe an old school motor with V belt, but not a newer motor with all those accessories attached to the front.

Verify your alarm if you have one.

Probably a bad connection to the starter (coroded or loose)

check the turn signal switch