Question about 2005 Nissan Murano

1 Answer

How can I get my rear hatch to unlock?

I have replace the actuator and the switch. Still will not unlock. It makes a slight clicking noise when I depress the button. Similar to another poster, this was always glitching and took some combination of using remote to unlock/lock. Eventually it would open. It finally quit working at all.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Nissan Master
  • 1,288 Answers

2005 Nissan Murano Service Repair Workshop Manual INSTANT DOWNLOAD

for better result of your problem click this link

Posted on Apr 04, 2016

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hatch won't release from the remote or the door switch. No solenoid sound at the hatch. How do I get it to open if it's not a bad fuse?


There are actually three relays , an there are controlled by the BCM - body control module !
When a door lock switch is activated in the lock or unlock position the BCM will receive a voltage signal on either the door lock switch lock or unlock signal circuits.
The BCM, upon receipt of a lock switch lock or unlock signal, will switch the appropriate lock relay control circuits to battery positive voltage. This will energize the appropriate lock or unlock relays. The relay will supply voltage to the door lock actuator lock or unlock control circuits to one side of the lock actuator. Since the opposing side of the lock actuators are connected to ground through the other lock actuator control circuit and the normally closed contacts of the lock or unlock relay, the doors and liftgate will then lock or unlock appropriately.
Three relays are used to operate the locks. DRV DR UNLCK relay, PASS DR UNLOCK and DR LCK relay. This is done to isolate the driver door lock actuator so it can be unlocked by itself using the keyless entry transmitter.
Rear Hatch/Gate Description and Operation
The liftgate can be opened by operating the switch on the instrument panel. Battery voltage is supplied to the liftgate actuator through the body control module (BCM). The BCM will pulse the liftgate actuator when a release input is received through the key fob, or the instrument panel switch.
Door/Lift gate Latch Assembly
  1. Install a 20-A fused jumper wire between the control terminal 3 and 12 volts. Install a jumper wire between the ground terminal 2 and ground.
  2. Verify the actuator turns on & off.
?‡'
If the function does not perform as specified, replace the applicable door latch.

Oct 01, 2015 | 2006 Pontiac Torrent

1 Answer

How to open stuck rear hatch 2007 suburban


Should be a round plug toward the bottom of the for panel..slightly off center.. pop it out and you can get a screwdriver in there and pop the latch open

Jul 24, 2014 | 2007 Chevrolet Suburban Three-Quarter-Ton...

1 Answer

I have a 2009 Ford Escape, the rear hatch doesn't open but th glass works fine. I think the problem is the lock actuator because when locking/unlocking the car, you can't hear the rear actuator making any...


It is definately the locking mechanism. .same issues with mazda tribute and mercury mariner ford escape...you will need to remove the panel to replace it..m

Jan 24, 2018 | Cars & Trucks

2 Answers

Problem The rear hatch door will not unlock.


First, on the rear hatch, there is an actuator. On FX, when you close the trunk, it kind of **** the hatch closed all the way. When you press lock on the remote, this same actuator locks it as well.
Now,
1) when you unlock the car from the inside, go back there and press the button to open the hatch door manually, do you here any noises?
2) Close all doors, go back close to the hatch button and using the remote , lock the car and then unlock the car. you should hear a sound from the actuator locking and unlocking the lock on the rear hatch!

If you don't hear this, your actuator is inop.
Next step would be to check the fuses inside the car, on the left bottom driver side, and outside on the battery compartment.
It might be just a fuse.
If all fuses check ok, your actuator is most likely gone! Not ea expensive fix, just time consuming!

NOW, if you can hear the noises, then something is either broken inside the actuator or one of the cables is loose!
Hope that helps.
Also, what year and miles on your fx?

Oct 20, 2009 | 2004 Infiniti FX35

1 Answer

2001 Ford Escape Rear Hatch won't unlock


The liftgate consists of the following components:
  • liftgate door lock actuator
  • liftgate lock cylinder (if equipped)
  • liftgate window glass
  • liftgate window latch/ajar switch
  • liftgate window glass release handle
  • liftgate latch remote control which consists of the following component:
    • liftgate release handle
  • liftgate latch, which consist of the following component:
    • liftgate latch door ajar switch
Liftgate Latch Actuator Removal and Installation
  1. Remove the liftgate latch remote control. For additional information, refer to Liftgate Latch Remote Control in this section.
SECTION 501-14: Handles, Locks, Latches and Entry Systems 2001 Escape Workshop Manual
REMOVAL AND INSTALLATION Liftgate Latch Removal and Installation
  1. Remove the liftgate trim panel.
  1. Disconnect the liftgate ajar switch electrical connector.
  1. Disconnect the liftgate latch actuating rod.
    1. Open the clip.
    1. Disconnect the actuating rod.
  1. Remove and discard the liftgate latch bolts.
  1. Remove the liftgate latch.
  1. NOTE: Make sure the liftgate latch release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.
    NOTE: Position the liftgate latch release rod by pushing outboard to remove the slack.
  1. Remove the screws and the liftgate latch actuator
90f640f.gif

May 29, 2009 | 2001 Ford Escape

1 Answer

DOES THE REAR HATCH HACE A KEY SLOT TO UNLOCK THE HATCH?


I think you will find a small hatch on the inside of the tailgate,this will allow you access to unlock the tailgate.Possibly the lock actuator has failed.

May 16, 2009 | 2000 Jeep Grand Cherokee

2 Answers

The rear air makes a thumping/clicking sound and doesn't send air; the 3rd row seats won't raise back up or go do for that matter and the rear door hatch handle extends but the door won't open (yes, the...


It has a bad rear temp control actuator. Start digging in the rear hatch for the thump and you will find the actuator. Have you checked fuses for the radio? The radio fuse memory fuse might also control the seat. As for the door, it sounds like a rusted latch. You will have to try to remove hatch panel to get to the latch to lube it or replace it.

Mar 07, 2009 | 2005 Ford Expedition

Not finding what you are looking for?
2005 Nissan Murano Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...