Location inertia switch bronco I 1987

SOURCE: e-150 fuel pump inertia switch location

on some fords it is on pass side kick panel you have to feel in a hole and you will feel a reset button,hope this helps

SOURCE: location of inertia switch/fuel pump

Yes it can. It doesn't take much like slamming a door or dropping a load of parts. There is only a magnetic ball inside the contacts and it is a wonder that Railroad tracks and Potholes do not trigger more shutoffs. All you do is find the switch and hold down the button on it for about 3 seconds.

Then try starting the van without slamming the doors shut until it is running. If the Inertia switch does not help check the fuse panel, then the relay. The relay should either be in the Black powerbox group or in with the fuseholders.

SOURCE: Where is the Bronco 2 (1988) Inertia switch

inertia shut off switch is located on the toe panel area on the passenger side next to the transmission hump

SOURCE: Is the inertia switch on a 1988 Bronco 2 easily

i'd say yes its doable, but before replacing the switch you may want to try & reset the switch
here's a how to


http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528007809f

SOURCE: cant find the inertia switch

The inertia switch should be located under the drivers side dash assembly near the steering column. It is very close to your brake light switch on the brake pedal. Hope this helps.