Question about 1996 Dodge Ram 1500 Club Cab

Open Question

Runs good in park, but when put in gear why does it cut off?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

85 ford f150 302 v8 2val carb stall when put in gear


How long since a tune-up? Have you checked the timing? How many miles on engine? How is your cylinder compression?
There isn't much load on engine in park or neutral. When you put it in gear, there is a load on the engine. With carbed engine 6--8 psi fuel pressure. Crub idle in drive, 575 rpms. With a high mileage engine, that idle speed may not work. Is there an idle screw on the carb, where you can up the idle to keep it from stalling, in gear? Of course if you do that, when you put it in park or neutral the idle is going to go high, I know it's a pain. If your engine is in poor shape, your probably going to have a tough time, getting it to run correctly. Just my opinion.

May 17, 2018 | Ford Cars & Trucks

1 Answer

Car runs fine in park and cuts off in drive


Don't know cars - but it might not be idling fast enough to make the gear change. Idle reset needed maybe?

Feb 14, 2013 | Cars & Trucks

1 Answer

97 f 250 5.8l cuts out under load


Cuts out when throttled in park or in gear if gear and cuts out cam can be blamed. Gas motor put a quart of tranny fluid in gas tank and run it it will clean valves

Jan 19, 2013 | 1997 Ford F250 SuperCab

2 Answers

My husband turned off our Chevy Trailblazer without putting it in gear and now it won''t start and the gear shift is lock up. What do you do to fix it????


first make sure battery isn't dead because if he cut it off in gear then the switch couldn't cut the power off and it'll run the battery down and there is a electrical solenoid that allows the shifter to move if theres no voltage than the shifter want go into park and the ignition switch want turn off.

Dec 27, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

CRANK THE CAR UP GEAR SELECTOR IN PARK, ONCE I MOVE IT TO REVERSE OR PARK IT CUTS OFF


This is the de-tent or kick down cable. Most commonly known as the down shift cable. This tells the transmission when the car needs it to down shift. If the cable does not do its job then the car stays in a higher gear and dies when put into gear. Hope this helps. Good luck.

Jul 25, 2009 | 2001 Acura MDX

1 Answer

Engine runs but cuts off when its put into gear.


I helped another 3 series owner and he had a hesitation off idle, the hose was cracked, seems fairly common on high mile cars.

Apr 17, 2009 | 1988 BMW 3 Series

1 Answer

1993 buick park ave will not change gears


Have your Catalytic Converter checked for free flow, (if it is stopped up with calcification from unspent fuel, then the car will have trouble moving at all). A tell tale sign of oncoming Catalytic Converter problems is the overdrive balking or wanting to hesitate, when the transmission is in overdrive the vehicle is running at its lowest r.p.m. and so like at idle it will stumble or hesitate, or cut the engine altogeter, for the motor has to be able to exhale, to exhaust its combustion gases, in order to run properly, stopped up catalytic converters are a big problem with this car.

Apr 16, 2009 | 1993 Buick Park Avenue

Not finding what you are looking for?
Cars & Trucks Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...