How do i program a new remote fob for my 1999 Freelander

How to program a key for a 1999 Mercury Cougar?

1999 Mercury Cougar Keyless Entry Remote Fob Programming Instructions

1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
2. Turn the ignition OFF. ...
3. Within 20 seconds, press any button on the first keyless remote. ...
4. Within 20 seconds, press any button on second keyless remote.
5. Turn the ignition to RUN.

1999 Mercury Cougar Keyless Entry Remote Fob ...

https://www.programyourremote.com > classified > 1999-...
Search for: How to program a key for a 1999 Mercury Cougar?

Has the battery ever been replaced? It may only need a new battery. When the battery has been replaced it will need to be 'synched' to the central locking. A few links to help you -
Key fob not working

How To Replace Land Rover Freelander Key Fob Battery 2002 2003 2004 2005

Hello Jennifer Jackson...

No... even LINCOLN windows are harder to break
(sorry... your LINCOLN is pretty secure).

Worse... the best price I've paid to get a double sided
PATS (passive anti-theft system) key cut = $6.

Bring your own key... But this was all about the price of PREVENTING your current situation... (oops).

If your ONLY key is truly "inside"...
Your goose is pretty much cooked... The cost of
the LOCKSMITH is pretty trivial compared to your
alternatives... Dealers will zing you MUCH BETTER
than your "expensive locksmith"...

But what ever you do... (my recommendation)... Since
you prefer not to be prepared... (no door code or FOB)
Don't pass on the opportunity to have that same SMITHY
at least tell you about your door code POSSIBILITIES
or at least program a remote FOB for you ...

A RESPONSIBLE "expensive locksmith" will
explain the WISDOM of NEVER having less than 2 (TWO) transponder keys. (by reading your owners manual you can program the FOBs yourself (FREE).

How do you manage the "no" keyless entry...?
I remain pretty sure the number pad... & KEY FOB
(wireless transmitter) were standard equipment...

2 SPARE keys minimum... ALWAYS.

SEALED Strattec Ford Mercury Lincoln PATS Transponder Chip Key UNCUT H72...

NEW FORD KEYLESS ENTRY CAR REMOTE FOB PAIR amp TWO UNCUT TRANSPONDER KEY...

1998 1999 2000 2001 2002 2003 Lincoln Town Car FOB Remote Transponder Car...

Carnac the Magnificent

un hook the battery for 10 to 15 seconds the try to un look the doors if that doesn't work, you might have to get a new fob you could also check into seeing about soft wear updates

Programming a new Key
Replacing a missing master key is quite expensive from Land Rover, try not to get sucked into the extra cost of "Dealer coding" You can do this yourself in 2 minutes by following the simple process below.
1) Get in and close all doors. Turn ignition on and off quickly and remove the key (all within about 5 seconds).

2) Within 30 seconds of turning the ignition off, while holding down the "unlock" button, press the "lock" button three times. Release the "unlock" button. (You may or may not get the confirmation from the door locks.) Holding the key at your head level provides best results as the key sensor is in the side window pillar.

3) Repeat for each key you want to initialize within 30 seconds after the last one you initialized (if you have more).

4) Right after doing the last key, quickly put the key back in the ignition and turn it on/off again to finalize.

Hi, as far as I know it is not possible to this yourself,

they cost £60 to get done from an independent decoder.
if you get both done ask for discount example £90 for 2.

Some decoders will come to you and do it so shop around for the best deal.

Regards
Dan

Synchronization
When remote control battery replaced,or system malfunction.
Hold remote close to vehicle
Press either button of remote 5 times or more in quick succession.

Try this link https://northcoastkeyless.com/1999-dodge-viper-keyless-entry-remote-fob-programming-instructions/

Should have a key fob.  You can buy a used one and the dealer can program it.  You can not program it yourself.

Manual Programming Procedure (non scan tool)
1. Connect pin 1 of the 16-way data link connector to chassis ground or to pin 4 of the 16-way data link connector.
2. Close all doors, turn ignition key to off.
3. Turn ignition key to Accessory.
4. Turn ignition to off, door locks will cycle once (in programming mode).
5. For each key FOB, press any button 3 times in a row to program code. When programming is complete, the door locks will cycle once.

NOTE:
IF A SECOND KEY FOB REQUIRES PROGRAMMING, IT MUST BE PROGRAMMED WITHIN 1 MINUTE OF PROGRAMMING
THE FIRST FOB PROGRAMMING. PRESS ANY BUTTON ON THE SECOND FOB 3 TIMES TO PROGRAM ITS CODE. WHEN PROGRAMMING IS COMPLETE, THE DOOR LOCKS WILL CYCLE ONCE.

6. The programming mode finishes after the following:
a. Programming of two key FOBS is completed.
b. One minute has passed since programming.
c. Pin 1 of 16-way data link connector is removed from ground connection.
d. Ignition switch is turned on.
e. Any of the doors are opened.