Top bolt if it's a stud and bushing type gets tightened until the threads run out - usually where the bushings squash pretty good. the nut on top will stop turning. Other fasteners tighten to about 50 lbs or so depending on the size of the bolt or nut. small bolts like 5/16, 3/8, 10mm shaft size get about 30 lbs. Torque is all about the size of the bolt ( the diameter) . Large fasteners like 1/2 in. and above get 50 to 80 lbs. . hope this was helpful
318 views
Usually answered in minutes!
×