1999 Dodge Stratus Logo

Related Topics:

Andrew Boucher Posted on May 21, 2016

Check engine and battery light both came on at the same time. Code was p1391.engine light gone. Tranny won't shift out of first gear, idle is high,and battery completely dead

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 07, 2008

SOURCE: Tranmission problem on 1999 Dodge Grand Caravan

Dear wramlal

I had the same problem, drove home just like you did, took it to my mechanic and he changed the "speed sensor " problem solved. "

Ad

Anonymous

  • 106 Answers
  • Posted on Mar 08, 2009

SOURCE: 2002 Dodge Caravan, Tranny would shift, DTC P0700, P0725

replace the input speed sensor to transmission and the wiring pigtail all are available at your chrysler dealer take your vehicle registration in to the parts counter so they have your vin # to get the right part and it is the front of trans by fluid linres to radiator.

gerry bissi

  • 4390 Answers
  • Posted on Jun 01, 2009

SOURCE: 1999 ford expedition - transmission slip?

the flashing O/D light usually means you have a bad speed sensor that sends speed info to the engine & trans computer.

Vehicle Speed Sensor The vehicle speed sensor (VSS) (Figure 42) is a variable reluctance or Hall-effect sensor that generates a waveform with a frequency that is proportional to the speed of the vehicle. If the vehicle is moving at a relatively low velocity, the sensor produces a signal with a low frequency. As the vehicle velocity increases, the sensor generates a signal with a higher frequency. The PCM uses the frequency signal generated by the VSS (and other inputs) to control such parameters as fuel injection, ignition control, transmission/transaxle shift scheduling and torque converter clutch scheduling.
-------------------------------------------------------------------
Vehicle Speed Sensor The vehicle speed sensor (VSS) (Figure 42) is a variable reluctance or Hall-effect sensor that generates a waveform with a frequency that is proportional to the speed of the vehicle. If the vehicle is moving at a relatively low velocity, the sensor produces a signal with a low frequency. As the vehicle velocity increases, the sensor generates a signal with a higher frequency. The PCM uses the frequency signal generated by the VSS (and other inputs) to control such parameters as fuel injection, ignition control, transmission/transaxle shift scheduling and torque converter clutch scheduling.

-------------------------------------------
Some trans use an OSS, Output Shaft Sensor instead of a VSS. Depends on which trans you have, 4R100 or 4R70W

Transmission Control Switch (TCS) and Transmission Control Indicator Lamp (TCIL)
The transmission control switch (TCS) is a momentary contact switch. When the switch is pressed, a signal is sent to the powertrain control module (PCM) to allow automatic shifts from first through fourth gears or first through third gears only. The PCM energizes the transmission control indicator lamp (TCIL) when the switch is off.

The TCIL indicates overdrive cancel mode activated (lamp on) and electronic pressure control (EPC) circuit shorted (lamp flashing) or monitored sensor failure.

Output Shaft Speed (OSS) Sensor
The output shaft speed (OSS) sensor is a magnetic pickup, located at the output shaft ring gear, that sends a signal to the powertrain control module (PCM) to indicate transmission output shaft speed. The OSS is used for torque converter clutch control, shift scheduling and to determine electronic pressure control.

Anonymous

  • 8 Answers
  • Posted on Oct 28, 2009

SOURCE: 2002 Dodge Durango 4.7L V8 Check Engine Codes

1st try and search for a vaccum leak, due to the fact that these vehicles have had some bad problems with the length of wires and hoses, if there is a vaccum leak in the vehicle somewhere that will trigger other malfunctions in your vehicle. Using a can of starting fluid or Brake cleaner spray lightly spray around our engine til you hear the motor rev-up and the spot you have sprayed will determine where your vaccum leak will be. And then check under your distributor cap for any moisture be sure to take a rag and wipe and residue off. Also check the firing order on your distributor.

Anonymous

  • 1 Answer
  • Posted on Nov 30, 2009

SOURCE: 2001 hyundai elantra idling high

weeeeiiirrdddd. i have a 2001 hyundia elentra gls, and my third cylinder is misfiring as well. my car also revs constantly on idle and in between shifting. it will flutter between 2-3000 or it will just stay at 5000. i replaced my plugs and wires to no fix with my cylinder. autozone also told me that it sounds like my throttle position sensor needs replaced, but every part they try to sell me will not fit and they swear up and down this is the right part...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Engine surge on slow acceleration

check tranny fluid level,if good,either pump in tranny is bad or cluthces in tranny is gone bad,how many miles?
0helpful
1answer

Lost all lights suddenly while driving on a trail.

the car has like 100 lights (you lost the all>?) fix head lamps first.!!!!
which ones, the head lamps, and parking lamps, highs and lows?
starts and idles, ok.
but will not go in to gear. (must be A./T tranny, as all gear boxes have gears and that dont tell me what trans you have nor engine options)

my guess, HL died. so you blew a fuse. or have corroded battery cables. or have corroded underhood fuse box. or other connections
from engine bay to cab fuse box.
my guess, is to put a voltmeter in the dash and wire it to ignition
next time you will see why it fails, you lost DC power.

some 88s had the ELECTRONIC shifted transmission.
most have just a simple pure mechically run A/T
ive no idea at all what trans you run, (find out,by looking)
if its not electronically shifted By TCM puter then the trans failure
is unrelated, but if it is a TCM tranny , then you lost DC power
to the TCM TOO.
easy huH?
0helpful
1answer

Idles high from first to second gear .

Define idles high like its going high rpms before shifting or the engine itself is high reving if its high rpming when shifting its mostly you tranny going out you can try tranny fix oil I used it on my truck when it had shifting problems and ive had no problems since it takes a few days to work though and if its the motor itself it could be a lot of things but I dont know much of the problem based on what you told us
0helpful
1answer

Transmission won't go into gear engine idled up high

They have teeth or a cam looking thing and if it won't go in it something inside it preventing it from locking in. Is reverse gone on the car or is reverse the only gear it goes into? then you have screwed up the tranny and it's gone.. time to replace tranny
0helpful
1answer

Not shifting

Any transmission trouble code will put the trans in second gear
and it won\'t shift.
Key on-off-on-off-on without starting the engine will illuminate
the check engine light .It will flash out the codes.Should see a 55
code ,5 flashes,a pause then 5 more. Any codes other than 12 and
55 need recorded for further diagnnosis.
I was thinking that turning the key on and opening the throttle wide
open 4 times within 5 seconds (engine off)clears tranny codes,not sure about that tho. You might try it then drive it and see if it shifts,although
as soon as the malfunction happens again it will go back into limp mode.
Tranny slipping or a slow shift or converter lock up malfunction along
with many other things will trigger this.
1helpful
1answer

Takes time shifting, and won't shift into high gear unless you gas on it.

May check fluid level and if low would more than likely indicate a leak. could also be a sensor that controls the shifting. does check engine light come on and if so,this could indicate a bad sensor.
3helpful
1answer

What does the p1391 code on a 99 dodge ram 1500 5.2l v8 meen

check engine light and code P1391 crank or cam position sensor

The above can cause rough idle on the Dodge Ram 1500 5.2L V8 Engine.

Can try to replace the sensor, but verify that the wires are ok first.
0helpful
1answer

95 saturn sc1 all of a sudden had engine light on and the idle just went way low, also effects how tranny shifts, but will barely stay running in gear with brake on. Sometimes it starts idling fine and...

You either have a bad engine coolant temp sensor & connector.Located under upper radiator hose at cylinder head Yellow & black wire.Original sensor is ceramic & replacement will be brass from saturn.Also you may check for vacuum leaks at PCV hose & valve.Hope this helps
0helpful
1answer

S10 blazer surges

might wanna check intake gasket for leaks on the high engine rev as for tranny might be in the comp
0helpful
1answer

My car jumps off when i select the D gear is this a major gearbox problem?

sounds more like a high idle problem to me.

Your tranny should have some "floating" when you shift to any gear, but if you are idled up too high then that "floating" disappears and it jumps.

I would check you idle before you think about tranny problems.
Not finding what you are looking for?

149 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...