SOURCE: how do i change a oil pan geskrt in a 94 jeep wrangler/
On most, you need to remove all bolts around the perimeter of the pan, (You may want to remove starter to get to fasteners there) then slide a paint scraper between the pan and block to break the seal. Generally there is enough room to get the pan out. If you need a bit more room, support the transmission with a jack (use a piece of plywood on top to avoid bending anything) remove both engine mount through bolts and raise engine slightly (not too much or you will break something)
SOURCE: removing oil pan on 2003 jeep wrangler with auto trans
use a pair of plyers and pull down on the plastic it should just be slid on the bolt take the tranny lines off the piece plastic first
SOURCE: mixed my bollts
Count the bolt holes and you should have a matching number of bolts. All the same size and length. you can also use the pan gasket for the pattern.
SOURCE: will the bolt pattern on rims off a 98 Jeep
Sorry no they won't fit.
S10 are 5 on 4.75 positive offset. You can put older wheels from many older chevys on them but they will stick out of the wheel wells if you have 4x4.
The Wrangler are 5 on 4.5 negative offset.
Removal & Installation
2.4L Engine
Fig. Oil pan mounting bolt tightening sequence-3.0L engine
2,214 views
Usually answered in minutes!
×