Hi can you help me with torque settings for main and big end bearings for 1.4 opel corsa

In the link

https://www.google.com/search?q=2008+opel+corsa+1300+bolt+torque+settings

..

Question edited for clarity and toss in some CAPS!
Question moved to model category.

https://www.google.com/search?q=Opel+Corsa+1.6+Torque+settings+for+big+ends+and+mains

..

https://www.migweb.co.uk/threads/torque-settings-on-1-6-xe-corsa-gsi-engine.356928/

The settings should be in the manual . Rule of thumb for torque is 45 ft lb on the big ends and 65 for the mains. Sorry, don't know the metric specs, but you can check on the internet for a conversion table, just google "conversion table" and you will find the answers. You need to convert between ft lb and Kg Meter - or something!!

if you are rebuilding the engine without the workshop manual before you, you will be missing important information including all that you ask for
manuals are available from most auto parts shops or technical publication shops
you are well advised to get a manual

i think the 1.6 ltr was only for some markets the engine i think it may be is! cyl head head with new bolts, 25nm +90 +90 +90 + 45 degrees the big end/conrod bearings 25nm +30 degrees thats if it a vauxhall/general motors engine. it may not be

Suggest you buy a proper workshop manual. If you are doing main bearing replacements then you owe it to yourself, your wallet and your car to obtain a decent manual

Hi I have a Opel Corsa utility 1.7D I am doing the hole engine over but I need the setting for it 2000modle Corsa and the engineers are rebuilding the crank is that okay or risky

hai i have a 1.4 8valve corsa lite 2007 model and need cylinder torque settings please