- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here are the torque specs for the flywheel and clutch plate on a 2003 Kia Spectra:
Flywheel: 78 - 80 ft-lbs (106 - 112 Nm)
Clutch plate: 19 - 21 ft-lbs (26 - 29 Nm)
It is important to follow the torque specs carefully when installing the flywheel and clutch plate, as over-tightening or under-tightening can cause damage.
Here are the steps on how to torque the flywheel and clutch plate on a 2003 Kia Spectra:
Install the flywheel and clutch plate.
Use a torque wrench to tighten the flywheel bolts to 78 - 80 ft-lbs (106 - 112 Nm).
Use a torque wrench to tighten the clutch plate bolts to 19 - 21 ft-lbs (26 - 29 Nm).
Reconnect the battery and start the engine.
Check for leaks.
If you are not comfortable tightening the flywheel and clutch plate yourself, you can take your Spectra to a qualified mechanic.
Here are the torque specs for the Nissan 1400 engine:
Main bearing cap bolts: 58-65 Nm (43-48 lb-ft)
Connecting rod cap bolts: 24-28 Nm (18-21 lb-ft)
Cylinder head bolts: 40-45 Nm (30-33 lb-ft)
Rocker arm shaft bolts: 20-25 Nm (15-18 lb-ft)
Flywheel bolts: 85-95 Nm (63-70 lb-ft)
Note that these are general torque specs and may vary slightly depending on the specific year and model of the Nissan 1400 engine. It's always best to consult the factory service manual for the exact torque specs for your engine.
Cylinder head bolt are 60 nm then a 90 Degree turn, Main bearing bolts are 30 nm then 180 degree turn and connecting rods are 30 nm then 90 degree turn.
Here are some common torque settings for the Mazda Demio with the ZJ engine:
Cylinder head bolts - 35-40 Nm (26-30 lb-ft)
Main bearing bolts - 54-61 Nm (40-45 lb-ft)
Connecting rod bolts - 25-29 Nm (18-21 lb-ft)
Camshaft bearing cap bolts - 8-10 Nm (6-7 lb-ft)
Intake manifold bolts - 22-25 Nm (16-18 lb-ft)
Exhaust manifold bolts - 25-28 Nm (18-21 lb-ft)
Flywheel bolts - 78-85 Nm (58-63 lb-ft)
It's important to note that these torque settings may vary depending on the specific year and model of your Mazda Demio. Always refer to your vehicle's service manual for the correct torque specifications.
Sure, here are the torque specifications for the flywheel, rod & main bearings, and head bolts for a Mitsubishi Canter 4D32 engine:
Flywheel bolts: 77.46 lb-ft (105 Nm) + 90 degrees
Connecting rod nuts: 37.38 lb-ft (50 Nm) + 90 degrees
Main bearing cap bolts: 27.31 lb-ft (37 Nm) + 90 degrees
Cylinder head bolts: 40.59 lb-ft (55 Nm) in the first step, then 90.63 lb-ft (123 Nm) + 90 degrees
It is important to follow these torque specifications carefully to prevent damage to the engine. If you are not comfortable tightening the bolts yourself, it is best to take your car to a qualified mechanic.
Here are some additional tips for tightening engine bolts:
Use a torque wrench to ensure that the bolts are tightened to the correct specification.
Tighten the bolts in a star pattern, working from the center out.
Do not overtighten the bolts, as this can damage the threads.
By following these tips, you can help to ensure that your Mitsubishi Canter 4D32 engine is properly maintained and will last for many miles.
For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts Start from center bolts and tighten in a clockwise rotation working out Step 1 all bolts 22 Nm or 16 ft lb Step 2 all bolts 44 Nm or 32 ft lb Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator. Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Hexagon Head Bearing Cap Sub-Assembly Bolts 1ZZ-FE Engine 18.5 Nm (14 ft.lb) 2ZZ-GE Engine 18 Nm (13 ft.lb)
Connecting rod: 1. Apply a light coat of engine oil on the threads and under the heads of theconnecting rod cap bolts. 2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts. 3. Retighten the cap bolts by 90 more 4. Check that the crankshaft turns smoothly.
×