Question about 2005 Nissan Murano
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Close all vehicle doors, LOCK doors using drivers side switch.
Insert key all the way into the ignition, (do not turn) remove key.
Repeat this step 5 times. (6 total)
Hazards should flash to indicate program mode.
Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.
*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.
Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.
Posted on Aug 06, 2008
most likely it is the transfer case leaking. known problem on the AWD models. they leak right down on the exhaust and causes the burning smell. have it checked out again.
Posted on May 14, 2009
You probably already figured this out, but you have to remove the wiper arm completely in order to replace the wiper blade.
The blades are an unusual size (somewhere around 14 1/2") and I believe they are only available from a Nissan dealership. They include printed instructions in the box but just in case, this is from the official Nissan service manual:
Posted on Jun 29, 2009
I am dealing with a very similar issue on my 03 Spec V , So far i noticed the clevis pin was loose and the locking hitch pin that slips thru it had fallen out . this caused the gears to not wanna engage due to the bolt behind the clevis which runs to the master cylinder was not getting pressed in when i pushed the clutch pedal in because the clevis pin was slippin on n off giving me no pressure up top .. I had to remove my lower dash panel in order to get visual n hand access to this pin , it is a tight spot to work in as well . May be easist to remove the 4 14mm bolts that hold yur driver seat in to give ya more room to work n stretch out ur arms
Posted on Dec 24, 2009
Tips for a great answer:
Apr 06, 2018 | Nissan Cars & Trucks
Aug 11, 2016 | 2005 Nissan Murano
Oct 24, 2014 | 2005 Nissan Murano
Feb 10, 2014 | 2005 Nissan Murano SL
May 20, 2013 | 2007 Hyundai Sonata Limited Sedan
Aug 28, 2011 | Nissan Murano Cars & Trucks
Mar 07, 2010 | 2005 Nissan Murano
Nov 30, 2009 | 2004 Nissan Murano
Jul 26, 2009 | 2005 Land Rover Freelander
Sep 11, 2008 | 2005 Nissan Quest
313 people viewed this question
Usually answered in minutes!