The
heater
core and evaporator are in a box together underneath the center of the
dashboard against the firewall. My service manual seems to indicate that
they both must come out at the same time to access either. Presuming
this is correct, here we go.
Disconnect
battery and wait half hour to disable SRS
Evacuate AC
Drain coolant. (It is not necessary to drain it completely.)
Disconnect AC liquid tube and suction hose. (Engine compartment firewall.)
Remove
instrument panel and reinforcement.
Dicsonnect heater hoses. (Engine compartment firewall.)
q=tbn:hFn1BMnyjvA3XM::http://www.autopartswarehouse.com/images/product_images/thumbs_100/spectra/spi94655.jpg
Remove heater core and evaporator from box.
Assembly is the reverse. Fill heater core and hoses with coolant to eliminate as much air as possible before installation.
×