Reset maintenance light on 2006 murano - 2006 Nissan Murano

That seems to be an indicator that your wheels (tires) should be rotated.

Your manual indicates the reset procedure for these service lights.

Below there is a video that depicts a 2006 being operated.

Hope this helps.

Nissan Murano Service Light Reset Guide

Take it to your local auto parts store and have them hook up the code scanner and some of them will tell you they're not allowed to do the reset but I just tell em it's cool...just reset it. Some won't do it at all so just go to a different store, someone is bound to do it.
Or you can buy a OBD scanner of your own and reset it yourself.

1. Turn your ignition switch on.
2. Press the Trip Computer switch until "Maintenance" is displayed. The trip computer button is located above the "Trip Reset" button and has a square graphic printed on it.
3. Press the "Select" button to enter the "Maintenance" menu. The "Select" button is above the "Trip Reset" button and has a circle graphic on it.
4. Press and hold the "Trip Reset" button for about 10 seconds until the maintenance reminder resets.

press info or trip button (depending on equipment package) until "maintenance" prompt comes up.press enter and scroll through selections to reset.

Nissan/Infiniti
Owners of many late-model Nissan and Infiniti vehicles have the unique privilege of actually setting the interval at which they would like to be alerted about changing oil. To do so:
1. Push the "MAINT" button on the main menu.
2. Select "Engine Oil" and push Enter.
3. Select "Maintenance Schedule" and push joystick right or left to select desired mileage.
4. To reset maintenance interval, select "Reset" and push Enter.
To reset the maintenance reminder, follow this procedure:
1. Push the "MAINT" button for more than 1.5 seconds.

Go to an auto parts store, they wire harnesses that will plug into most vehicles. If they make one for your Nissan, I don't know, but it's a real simple deal you just plug it in to existing harness in the rear of the vehicle.

i found this on a Murano forum, so i cannot validate whether or not it works.
-To reset the maintenance notice on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule" key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.-

Hope this helps,
matt

generally you just unhook the battery for about 15 minutes and hook it back up... if you have an anti-theft radio... make sure you know the code and how to enter it.

there is a problem with your vehicle and its transmission valve body.this will cause this type problem and it will store a code in the tcm,but wil not illuminate on the dash,this is the only problem i can find that mentions these type symptoms,please see a qualified nissan tech,and have your vehicle scanned for these codes;po868,po840

press maintanence button until you see engine oil, then hold trip/reset button... :)