How do you remove 4th spark plug from 2005 pt cruiser?

mike loshbough

• 1011 Answers
• Posted on Jan 25, 2009

SOURCE: where is the crank sensor located on 2005 chrysler pt cruiser?

the crank sensor is located on back right side of engine by were the trans. bolts up.is the no start when could or hot?

SOURCE: 2005 pt cruiser... it sputters and won't idle well

That is the first thing i would suggest you do. Replace all the spark plugs and the plug wires. Those 2 things are the most commen thing that cause misfires.

SOURCE: how do i remove rear power window switch, and

REAR - SEDAN ONLY

1. Disconnect and isolate the battery negative cable.
2. Using a trim stick or equivalent, gently pry at the top of the switch.
3. Remove switch and disconnect electrical harness connectors.

Remontti-J

• 32 Answers
• Posted on May 31, 2009

SOURCE: Need to remove Intake Manifold on 2002 PT Cruiser

Here are my photos what you need to open when replace plugs&wires:

http://www.ptcruiser.fi/ptgalleria/albums/userpics/10010/normal_tulppa1.jpg

http://www.ptcruiser.fi/ptgalleria/albums/userpics/10010/tulppa2.jpg

http://www.ptcruiser.fi/ptgalleria/albums/userpics/10010/tulppa3.jpg

SOURCE: how do you change the spark plugs on a 2004 pt

remove the plastic cover.
remove the thing on top of the plug.
use a spark plug socket,(5/8) and replace the plugs with platinum plugs