Sorry dealer only ,try cleaning the valve on the inlet manifold that is a electric motor with a taper on the end ,make sure the offrice it sits in is clean as well
Hi Colin, I have a high idling problem with my 1.4 Nissan Micra 2005 model. This happened after the Throttle body was removed and cleaned. I managed to get the Idle Air Volume Learning procedure from the Launchtech website. When performing the procedure with the X431, the idle drop but does not want 'save' the new setting. Why would that be? I have read that to set the Idle Air Volume, the water temp must be at 90degrees. Could that be the problem? I also cleared the ECU memory before setting the Idle Air Volume.
×
1,028 views
Usually answered in minutes!
×