Need help with 2007 chevy pick up have vin #2GCEK13Z871125228 where is the fuses and where are they located
We have tried to replace the signal light moduale and that did'nt do anything to help the signal light to the left works but the signal light to the right does not work when turned on
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ambient Light sensor signal fuse ????? There is no fuse , get's 5volt reference voltage from the BCM - body control module . Your best bet ,take your vehicle to a qualified repair shop that has the diagnostic tool's (professional scan tool ) to trouble shoot the problem . Just by asking about a fuse we know you have no clue. So do yourself a favor before you make thing's worse.
Common fuse and modulator (flasher) so if one side works then that isn't the problem. Check the bulbs and verify that there isn't power at the socket with the blinker on. Sounds like the multifunction (turn/high beam) switch has gone bad.
There are a few things that can make it look like a bad relay. Most times it's a bulb that has burned-out. Or your blinker unit has gone bad. A Chilton/Haynes repair manual, available at your local auto parts store will tell you where your relays are. But I'd check the first 2 items first. Or check your fuse that controls the turn signals.
It's time to replace the flasher relay.The signal flasher is located under the dash near the steering column.Also check for the indicator bulb.Replace them if damaged. Front Turn Signal Light Bulb Size: 3457ALL
Rear Turn Signal Light Bulb Size: 3057 Hope this helps.Your valuable feedback would be appreciated.Thanks
The location of the flasher relay on a 1998 Dodge Truck is in the fuse panel which is located on the left side of the dash. It is accessable when the door is open. All you need to do is pull off the panel cover to expose the fuses, and the diagram on the fuse cover will show you which one is the falsh relay. The one on my truck is blue, and is about one inch square.
under the dash near the steering column will be a unit called the electronic flasher module (don't know exact location as it varies, but it will be labeled). It sounds like the unit has gone bad
×