SOURCE: 95 f250 #7 fuse keeps blowing under hood what does this controll
you have a short its almost impossible to find..i would take it to a dealer
SOURCE: the engin control fuse keeps blowing on my 2005
your fuelpump could be causing the fuse to blow as it may be seizing up
SOURCE: my 94 ford explorer keeps blowing the 30 amp EEC
There has to be a short in the EEC. My advice would be to take it to a mechanic you don't want to be playing with electronics if you don't have the expertiese. It's a good way to fry more systems
SOURCE: Wiring Diagram for 1999 Ford Ranger 3.0
if u can gain access to the ignition switch wiring use a testlight and probe each wire while turning the ignition at start position.one of these wires shld have power during starting position and release it again to confirm.this wire goes directly to the trasmission multi lever position swicht (mlp).this MLP is mounted just outside the transmission shifting lever ganged together.Trace the corresponding return wire using the testlight. You may need someone to help you do the job.The return wire usually go to a relay on your fuse box on the engine compartment.Then from relay to the starter.
1,069 views
Usually answered in minutes!
×