My 2002 Nissan Frontier Pick Up Goes into reverse, travels about 5 ft. then goes out of gear. The computer reads out that it "does not recognize reverse"
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1998-2002 Nissan Frontier with 2.4 L KA24D and KA24DE class engines , Cylinder Head Bolts Tightening Procedure :- you have total of 10 bolts , 5 on the LH of engine and 5 on RH ( LH is the intake side and the RH is the exhaust side ) : starting from center LH #1 , #2 on RH center side , #3 LH front of #1 , #4 RH behind #2, #5 RH before #2 , #6 LH behind #1 , #7RH engine front corner , #8 LH end of engine corner, #9 LH front engine corner and final #10 bold is RH end of engine corner .
the Torque spec steps are as follows :
step A- tighten all bolts to 29N-M ( 3.0 kg-M or 22 Ft lb ) step B- tighten all bolts to 79 N-M ( 8.1 kg-M or 59 Ft ib )
step C- loosen all bolts completely .
step D- tighten all bolts again to 25 up to 34 N-M ( 2.5 up to 3.5 kg - M or 18 to 25 Ft lb )
step E- using angle wrench ( turn all bolts clockwise 86+ - degrees ) if you don't have an angle wrench ? do as follows : as final step : tighten all Bolts 75 up to 84 N-M ( 7.6 up to 8.6 Kg - M or 55 to 62 Ft lb ) .
end of procedure .
it will be the revers switch that's connected to the gear box when you put the car van truck into reverse it hits a switch and turns reverse lights on might just be the wire has come off or the switch is broken
My VW is not shifting into reverse at all; I think a certain person was driving and mistakenly pressed the gear shifter down for all gears--reverse is the only gear you press the shifter down first in. Doesn't grind, 1 2 3 and 4 work but no reverse no reverse lights.
I've read several complicated (can't see scenario's) posts on screens and linkage and a cable fixed one guys problem but still no solutions.
×